Table of Contents
Advertisement
Chapter 7
Managing JUNOS Software Licenses
Adding New Licenses
Adding New Licenses on page 65
Deleting a License on page 66
Saving License Keys on page 66
Verifying JUNOS Licenses on page 66
Before adding new licenses, complete the following tasks:
Purchase the required licenses.
Establish basic network connectivity with the router. For instructions on
establishing basic connectivity, see the Getting Started Guide for your router.
To add a new license key to the router with the CLI:
Enter operational mode in the CLI.
1.
Enter one of the following CLI commands:
2.
To add a license key from a file or URL, enter the following command,
specifying the filename or the URL where the key is located:
user@host> request system license add filename | url
To add a license key from the terminal, enter the following command:
user@host> request system license add terminal
When prompted, enter the license key, separating multiple license keys with a
3.
blank line.
If the license key you enter is invalid, an error appears in the CLI output when
you press Ctrl+d to exit license entry mode.
Go on to "Verifying JUNOS Licenses" on page 66.
4.
65
Adding New Licenses
Advertisement
Table of Contents
