Juniper JUNOS SOFTWARE 10.2 - SOFTWARE INSTALLATION AND UPGRADE GUIDE 4-28-2010 Upgrade Manual page 20

JUNOS Release 10.2 Software Installation and Upgrade Guide
Table 2: Text and Syntax Conventions (continued)
Convention
Plain text like this
< > (angle brackets)
| (pipe symbol)
# (pound sign)
[ ] (square brackets)
Indention and braces ( { } )
; (semicolon)
J-Web GUI Conventions
Bold text like this
> (bold right angle bracket)
Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can send your comments to
techpubs-comments@juniper.net
https://www.juniper.net/cgi-bin/docbugreport/
the following information with your comments:
xx
Documentation Feedback
Description
Represents names of configuration
statements, commands, files, and
directories; IP addresses; configuration
hierarchy levels; or labels on routing
platform components.
Enclose optional keywords or variables.
Indicates a choice between the mutually
exclusive keywords or variables on either
side of the symbol. The set of choices is
often enclosed in parentheses for clarity.
Indicates a comment specified on the
same line as the configuration statement
to which it applies.
Enclose a variable for which you can
substitute one or more values.
Identify a level in the configuration
hierarchy.
Identifies a leaf statement at a
configuration hierarchy level.
Represents J-Web graphical user
interface (GUI) items you click or select.
Separates levels in a hierarchy of J-Web
selections.
, or fill out the documentation feedback form at
Document or topic name
URL or page number
Examples
To configure a stub area, include
the stub statement at the
protocols ospf area area-id]
hierarchy level.
The console port is labeled
.
CONSOLE
stub <default-metric metric>;
broadcast | multicast
(string1 | string2 | string3
rsvp { # Required for dynamic MPLS only
community name members [
community-ids ]
[edit]
routing-options {
static {
route default {
nexthop address;
retain;
}
}
}
In the Logical Interfaces box, select
All Interfaces.
To cancel the configuration, click
Cancel.
In the configuration editor hierarchy,
select Protocols>Ospf.
. If you are using e-mail, be sure to include
[edit
)