Juniper JUNOS SOFTWARE 10.2 - SOFTWARE INSTALLATION AND UPGRADE GUIDE 4-28-2010 Upgrade Manual page 69

Configure Administration User Accounts
Set the root administration user account password. You also need to set up one or
more administration user accounts. These administration user accounts are used to
log in to the router through the management console. To configure administration
user accounts:
1.
2.
3.
Add the Management Console to the Network
To add the management console to the network:
1.
NOTE: The hostname specified in the router configuration is not used by the DNS
server to resolve to the correct IP address. This hostname is used to display the name
of the Routing Engine in the CLI. For example, this hostname appears on the
command line prompt when the user is logged in to the CLI:
2.
3.
[edit]
root#
Add a password to the root (superuser) administration user account.
[edit]
root# set system root-authentication plain-text-password
New password: password
Retype new password: password
Create a management console user account.
[edit]
root# set system login user user-name authentication plain-text-password
New Password: password
Retype new password: password
Set the user account class to
[edit]
root# set system login user user-name class super-user
Specify the router hostname.
user-name@host-name>
[edit]
root# set system host-name host-name
Configure the IP address of the DNS server.
[edit]
root# set system name-server address
Configure the router domain name.
Chapter 5: Completing a Recovery Installation
.
super-user
Configure Administration User Accounts
47