Chapter 6, Managing Modules - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual

ERX 11.3.x Module Guide
2
This guide provides an overview and description of the line modules (LMs), switch route
processor (SRP) modules, and I/O modules available for the following Juniper Networks
E Series Broadband Services Routers: ERX14xx models, ERX7xx models, and the ERX310
router.
Unless otherwise specified, all line modules pair with I/O modules to create a module
combination. Each module combination provides particular capabilities and connections
in an ERX router.
NOTE: A release may support multiple versions of a module. For information,
see Software Compatibility in JunosE System Basics Configuration Guide,

Chapter 6, Managing Modules.

Table 1 on page 3 lists the module combinations supported by ERX routers.
This book also contains three appendixes:
Module Protocol Support on page 87
Module LEDs on page 109
Module Name Cross-Reference Information on page 115
Product Reclamation and Recycling Program on page 119
For more information about ERX routers and modules, refer to the following books:
Modules that have reached end-of-life—E Series End-of-Life Module Guide
Module installation and maintenance—ERX Hardware Guide
Managing ERX routers—JunosE System Basics Configuration Guide
Configuring ERX modules—JunosE Link Layer Configuration Guide
Copyright © 2010, Juniper Networks, Inc.