Juniper ERX - RELEASE 11.1.X MODULE GUIDE 4-6-2010 Manual
  1. Manuals
  2. Brands
  3. Juniper Manuals
  4. Network Router
  5. ERX - RELEASE 11.1.X MODULE GUIDE 4-6-2010
  6. Manual
Juniper ERX - RELEASE 11.1.X MODULE GUIDE 4-6-2010 Manual

Juniper ERX - RELEASE 11.1.X MODULE GUIDE 4-6-2010 Manual

E series broadband services routers module guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
E Series
Broadband Services Routers
ERX
Module Guide
Release 11.1.x
Juniper Networks, Inc.
1194 North Mathilda Avenue
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Published: 2010-04-06

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ERX - RELEASE 11.1.X MODULE GUIDE 4-6-2010 and is the answer not in the manual?

Questions and answers

Related Manuals for Juniper ERX - RELEASE 11.1.X MODULE GUIDE 4-6-2010

Summary of Contents for Juniper ERX - RELEASE 11.1.X MODULE GUIDE 4-6-2010

  • Page 1 E Series Broadband Services Routers Module Guide Release 11.1.x Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 408-745-2000 www.juniper.net Published: 2010-04-06...
  • Page 2 ERX 11.1.x Module Guide This guide provides an overview and description of the line modules (LMs), switch route processor (SRP) modules, and I/O modules available for the following Juniper Networks E Series Broadband Services Routers: ERX14xx models, ERX7xx models, and the ERX310 router. Unless otherwise specified, all line modules pair with I/O modules to create a module combination.
  • Page 3 Table 1: ERX Module Combinations First Line Module I/O Module JUNOSe Combination Name and Type Label Label Support Page Channelized OC3/STM1 cOC3/STM1 multimode cOCx/STMx cOC3 STM1 F0 2.2.0 MULTIMODE cOC3/STM1 single-mode intermediate cOCx/STMx cOC3 STM1 F0 2.2.0 reach SINGLE MODE cOC3/STM1 single-mode long reach cOCx/STMx cOC3 STM1 F0...
  • Page 4 ERX 11.1.x Module Guide Table 1: ERX Module Combinations (continued) First Line Module I/O Module JUNOSe Combination Name and Type Label Label Support Page GE 1000Base-LH (256-MB memory) GE/FE GE I/O SFP 5.0.0 GE 1000Base-ZX (256-MB memory) GE/FE GE I/O SFP 5.0.0 GE multimode GE/FE...
  • Page 5 Table 1: ERX Module Combinations (continued) First Line Module I/O Module JUNOSe Combination Name and Type Label Label Support Page IPSec Service IPSec Service IPSEC No I/O module 4.0.2 SERVICE OC3/STM1 ATM OC3/STM1 ATM multimode without OCx/STMx OC3-4 I/O 5.0.0, APS/MSP redundancy (256-MB memory) ATM or 5.3.0...
  • Page 6 ERX 11.1.x Module Guide Table 1: ERX Module Combinations (continued) First Line Module I/O Module JUNOSe Combination Name and Type Label Label Support Page OC3/STM1 POS single-mode intermediate OCx/STMx 4XOC3 APS 5.1.2 reach with APS/MSP redundancy 5.2.0 SINGLE MODE (APS/MSP) OC3/STM1 POS single-mode long reach OCx/STMx OC3-4 I/O...
  • Page 7 Table 1: ERX Module Combinations (continued) First Line Module I/O Module JUNOSe Combination Name and Type Label Label Support Page OC12/STM4 POS multimode with OCx/STMx OC12 STM4 2.0.0 APS/MSP redundancy MULTI MODE OC12/STM4 POS single-mode OCx/STMx OC12 STM4 2.0.0 intermediate reach without APS/MSP redundancy SINGLE MODE OC12/STM4 POS single-mode...
  • Page 8 ERX 11.1.x Module Guide Table 1: ERX Module Combinations (continued) First Line Module I/O Module JUNOSe Combination Name and Type Label Label Support Page SRP-SE10G (1-GB memory) SRP-SE10G SRP-SE I/O 5.3.0 T3 ATM (4 ports) OCx/STMx 4xDS3 ATM 4.1.0 (128 ATM or OCx/STMx /DS3-ATM...
  • Page 9 cOC3/STM1 Multimode Module Combination cOC3/STM1 Multimode Module Combination cOCx/STMx F0 Line module label cOC3 STM1 F0 I/O I/O module label MULTI MODE Number of I/O ports First supported: 2.2.0 Software release Final supported: Not applicable 130 W Description OC3/STM1 channelized to DS3, DS1, E1, and DS0 Supports either E1 or T1 operation, but not E1 and T1 operation simultaneously EFA ASIC Type...
  • Page 10 ERX 11.1.x Module Guide Up to four SC full duplex connectors Cables and connectors Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 11 cOC3/STM1 Single-Mode Intermediate Reach Module Combination cOC3/STM1 Single-Mode Intermediate Reach Module Combination cOCx/STMx F0 Line module label cOC3 STM1 F0 I/O I/O module label SINGLE MODE Number of I/O ports First supported: 2.2.0 Software release Final supported: Not applicable 130 W Description OC3/STM1 channelized to DS3, DS1, E1, and DS0 EFA ASIC...
  • Page 12 ERX 11.1.x Module Guide Up to four SC full duplex connectors Cables and connectors Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 13 cOC3/STM1 Single-Mode Long Reach Module Combination cOC3/STM1 Single-Mode Long Reach Module Combination cOCx/STMx F0 Line module label cOC3 STM1 F0 I/O I/O module label LONG HAUL Number of I/O ports First supported: 2.2.0 Software release Final supported: Not applicable 130 W Description OC3/STM1 channelized to DS3, DS1, E1, and DS0 EFA ASIC...
  • Page 14 ERX 11.1.x Module Guide Up to four SC full duplex connectors Cables and connectors Tx power: min: –5.0 dBm max: 0 dBm Center wavelength: 1310 nm Rx input power: min: –34 dBm max: –7 dBm Fiber type: 9-micron core Rated for 40 km (24.8 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 15 cOC12/STM4 Multimode Without APS/MSP Redundancy Module Combination cOC12/STM4 Multimode Without APS/MSP Redundancy Module Combination cOCx/STMx F0 Line module label cOC12 STM4 F0 I/O I/O module label MULTI MODE Number of I/O ports First supported: 2.2.0 Software release Final supported: Not applicable 130 W Description OC12/STM4 channelized to DS3, DS1, E1, and DS0...
  • Page 16 ERX 11.1.x Module Guide SC full duplex connector Cables and connectors Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 17 cOC12/STM4 Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination cOC12/STM4 Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination cOCx/STMx F0 Line module label cOC12 STM4 F0 I/O I/O module label SINGLE MODE Number of I/O ports First supported: 2.2.0 Software release Final supported: Not applicable 130 W Description...
  • Page 18 ERX 11.1.x Module Guide SC full duplex connector Cables and connectors Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 19 cOC12/STM4 Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination cOC12/STM4 Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination cOCx/STMx F0 Line module label COC12 F0 APS I/O module label SINGLE MODE Number of I/O ports 1 active, 1 redundant First supported: 6.1.3 or later 6.1.x release, 7.0.2 or later 7.0.x release, 7.2.0 and Software release higher-numbered release 130 W...
  • Page 20 ERX 11.1.x Module Guide SC full duplex connector Cables and connectors Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –7 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 21 cOC12/STM4 Single-Mode Long Reach Module Combination cOC12/STM4 Single-Mode Long Reach Module Combination cOCx/STMx F0 Line module label cOC12 STM4 I/O module label LONG HAUL 1 active, 1 redundant Number of I/O ports First supported: 2.2.0 Software release Final supported: Not applicable 130 W Description OC12/STM4 channelized to DS3, DS1, E1, and DS0...
  • Page 22 ERX 11.1.x Module Guide SC full duplex connector Cables and connectors Tx power: min: –5.0 dBm max: 0 dBm Center wavelength: 1310 nm Rx input power: min: –34 dBm max: –7 dBm Fiber type: 9-micron core Rated for 40 km (24.8 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 23 CT3/T3 12 Module Combination (12 Ports) CT3/T3 12 Module Combination (12 Ports) CT3/T3-F0 Line module label CT3/T3 12 I/O I/O module label Number of I/O ports First supported: 3.2.0 Software release Final supported: Not applicable 130 W Description Channelized and unchannelized T3 EFA ASIC Type DS3, DS1, DS0...
  • Page 24 ERX 11.1.x Module Guide E3 Frame Module Combination (12 Ports) COCX-F3 Line module label E3-12 I/O module label FRAME I/O Number of I/O ports First supported: 4.0.2 Software release Final supported: Not applicable 135 W Description Unchannelized E3 for Frame EFA ASIC Type Capability...
  • Page 25 FE-8 Module Combination (8 Ports) (256-MB Memory) FE-8 Module Combination (8 Ports) (256-MB Memory) GE/FE Line module label FE-8 I/O I/O module label Number of I/O ports First supported: 5.0.0 Software release Final supported: Not applicable The GE/FE line module must have a minimum of 256 MB of memory to be used with JUNOSe Release 5.3.0 or a higher-numbered release.
  • Page 26 ERX 11.1.x Module Guide FE-8 SFP Module Combination (8 Ports) (256-MB Memory) GE/FE Line module label FE-8 SFP I/O I/O module label Number of I/O ports First supported: 6.0.0 Software release Final supported: Not applicable 130 W Description Fast Ethernet The FE-8 SFP I/O module uses a range of small form-factor pluggable (SFP) transceivers to support different modes and cable lengths.
  • Page 27 FE-8 SFP Module Combination (8 Ports) (256-MB Memory) LC full duplex Cables and connectors (multimode fiber) Tx power: –20 dBm minimum and –14 dBm maximum Center wavelength: 850 nm Rx input power: –31 dBm minimum and –14 dBm maximum Rated for 2 km (1.2 miles) over 62.5/125-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 28 ERX 11.1.x Module Guide GE 1000Base-SX Module Combination (1 Port) (256-MB Memory) GE/FE Line module label GE I/O SFP I/O module label 1 active, 1 redundant Number of I/O ports First supported: 5.0.0 Software release Final supported: Not applicable 130 W Description Gigabit Ethernet 256 MB of memory...
  • Page 29 GE 1000Base-SX Module Combination (1 Port) (256-MB Memory) LC full duplex Cables and connectors (SX) Tx power: min: –9.5 dBm max: –4 dBm Center wavelength: 850 nm Rx input power: min: –20 dBm max: –0 dBm Rated for 275 m (300 yards) over 62.5-micron core cable Rated for 550 m (601 yards) over 50-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 30 ERX 11.1.x Module Guide GE 1000Base-LH Module Combination (1 Port) (256-MB Memory) GE/FE Line module label GE I/O SFP I/O module label 1 active, 1 redundant Number of I/O ports First supported: 5.0.0 Software release Final supported: Not applicable 130 W Description Gigabit Ethernet 256 MB of memory...
  • Page 31 GE 1000Base-LH Module Combination (1 Port) (256-MB Memory) LC full duplex Cables and connectors (LX/LH) Tx power: min: –9.5 dBm max: –3 dBm Center wavelength: 1300 nm Rx input power: min: –20 dBm max: –3 dBm Rated for 10 km (6.2 miles) over 10-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 32 ERX 11.1.x Module Guide GE 1000Base-ZX Module Combination (1 Port) (256-MB Memory) GE/FE Line module label GE I/O SFP I/O module label 1 active, 1 redundant Number of I/O ports First supported: 5.0.0 Software release Final supported: Not applicable 130 W Description Gigabit Ethernet 256 MB of memory...
  • Page 33 GE 1000Base-ZX Module Combination (1 Port) (256-MB Memory) LC full duplex Cables and connectors (ZX) Tx power: min: –2 dBm max: 3 dBm Center wavelength: 1550 nm Rx input power: min: –22 dBm max: –3 dBm Rated for 70 km (43.4 miles) over 10-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 34 ERX 11.1.x Module Guide GE Multimode Module Combination (1 Port) GE/FE Line module label GE I/O I/O module label MULTI MODE 1 active, 1 redundant Number of I/O ports First supported: 2.0.0 Software release Final supported: Not applicable 130 W Description Gigabit Ethernet This module combination has been superseded by a newer assembly;...
  • Page 35 GE Multimode Module Combination (1 Port) See “Module LEDs” on page 133. LEDs See Monitoring Ethernet Interfaces in JUNOSe Physical Layer Configuration Guide, Alarms, errors, and events Chapter 5, Configuring Ethernet Interfaces. GE Multimode Module Combination (1 Port)
  • Page 36 ERX 11.1.x Module Guide GE Single-Mode Module Combination (1 Port) GE/FE Line module label GE I/O I/O module label SINGLE MODE 1 active, 1 redundant Number of I/O ports First supported: 2.0.0 Software release Final supported: Not applicable 130 W Description Gigabit Ethernet This module combination has been superseded by a newer assembly;...
  • Page 37 GE Single-Mode Module Combination (1 Port) See “Module LEDs” on page 133. LEDs See Monitoring Ethernet Interfaces in JUNOSe Physical Layer Configuration Guide, Alarms, errors, and events Chapter 5, Configuring Ethernet Interfaces. GE Single-Mode Module Combination (1 Port)
  • Page 38 ERX 11.1.x Module Guide GE2 1000Base-SX Module Combination (2 Ports) GE-2 Line module label GE-2 SFP I/O or 2XGE APS I/O SFP or GE-2 APS I/O SFP I/O module label 2 active, 2 redundant Number of I/O ports First supported: 5.3.0 Software release Final supported: Not applicable 100 W...
  • Page 39 GE2 1000Base-SX Module Combination (2 Ports) LC full duplex Cables and connectors (SX) Tx power: min: –9.5 dBm max: –4 dBm Center wavelength: 850 nm Rx input power: min: –17 dBm max: –3 dBm Rated for 275 m (300 yards) over 62.5-micron core cable Rated for 550 m (601 yards) over 50-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 40 ERX 11.1.x Module Guide GE2 1000Base-LH Module Combination (2 Ports) GE-2 Line module label GE-2 SFP I/O or 2XGE APS I/O SFP or GE-2 APS I/O SFP I/O module label 2 active, 2 redundant Number of I/O ports First supported: 5.3.0 Software release Final supported: Not applicable 100 W...
  • Page 41 GE2 1000Base-LH Module Combination (2 Ports) LC full duplex Cables and connectors (LX/LH) Tx power: min: –9.5 dBm max: –3 dBm Center wavelength: 1300 nm Rx input power: min: –20 dBm max: –3 dBm Rated for 10 km (6.2 miles) over 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 42 ERX 11.1.x Module Guide GE2 1000Base-ZX Module Combination (2 Ports) GE-2 Line module label GE-2 SFP I/O or 2XGE APS I/O SFP or GE-2 APS I/O SFP I/O module label 2 active, 2 redundant Number of I/O ports First supported: 5.3.0 Software release Final supported: Not applicable 100 W...
  • Page 43 GE2 1000Base-ZX Module Combination (2 Ports) LC full duplex Cables and connectors Tx power: min: –3 dBm max: 2 dBm Center wavelength: 1550 nm Rx input power: min: –23 dBm max: –3 dBm Rated for 70 km (43.4 miles) over 10-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 44 ERX 11.1.x Module Guide GE High Density (HDE) Module Combination (2 Ports) GE-HDE Line module label GE-2 SFP I/O or 2XGE APS I/O SFP or GE-2 APS I/O SFP I/O module label 2 active, 2 redundant Number of I/O ports First supported: 7.0.0 Software release Final supported: Not applicable...
  • Page 45 GE High Density (HDE) Module Combination (2 Ports) LC full duplex Cables and connectors (LX/LH) Tx power: min: –9.5 dBm max: –3 dBm Center wavelength: 1300 nm Rx input power: min: –20 dBm max: –3 dBm Rated for 10 km (6.2 miles) over 10-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 46 ERX 11.1.x Module Guide GE High Density (HDE) Module Combination (8 Ports) GE-HDE Line module label GE-8 I/O I/O module label Number of I/O ports First supported: 7.0.0 Software release Final supported: Not applicable 100 W Description Gigabit Ethernet The I/O module uses a range of small form-factor pluggable (SFP) transceivers to support different modes and cabling distances.
  • Page 47 GE High Density (HDE) Module Combination (8 Ports) LC full duplex Cables and connectors Tx power: min: –9.5 dBm max: –3 dBm Center wavelength: 1300 nm Rx input power: min: –20 dBm max: –3 dBm Rated for 10 km (6.2 miles) over 10-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 48 ERX 11.1.x Module Guide IPSec Service Module Combination IPSEC SERVICE Line module label No I/O module I/O module label Not applicable Number of I/O ports First supported: 4.0.2 Software release Final supported: Not applicable 130 W Description IPSec Tunnel Service EFA ASIC Type IPSec tunnels...
  • Page 49 OC3/STM1 ATM Multimode Without APS/MSP Redundancy Module Combination (256-MB Memory) OC3/STM1 ATM Multimode Without APS/MSP Redundancy Module Combination (256-MB Memory) OCx/STMx ATM or OCx/STMx /DS3-ATM Line module label OC3-4 I/O I/O module label MULTI MODE Number of I/O ports First supported: 5.0.0, 5.3.0 or a higher-numbered release Software release Final supported: Not applicable 130 W...
  • Page 50 ERX 11.1.x Module Guide SC full duplex connector Cables and connectors Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 51 OC3/STM1 ATM Multimode With APS/MSP Redundancy Module Combination OC3/STM1 ATM Multimode With APS/MSP Redundancy Module Combination OCx/STMx ATM or OCx/STMx /DS3-ATM Line module label 4XOC3 I/O module label APS I/O MULTI MODE 4 active, 4 redundant Number of I/O ports First supported: 5.1.2, 5.2.0 (APS/MSP) Software release Final supported: Not applicable...
  • Page 52 ERX 11.1.x Module Guide LC full duplex Cables and connectors Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 53 OC3/STM1 ATM Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination (256-MB Memory) OC3/STM1 ATM Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination (256-MB Memory) OCx/STMx ATM or OCx/STMx /DS3-ATM Line module label OC3-4 I/O I/O module label SINGLE MODE Number of I/O ports First supported: 5.0.0, 5.3.0 or a higher-numbered release Software release Final supported: Not applicable...
  • Page 54 ERX 11.1.x Module Guide SC full duplex Cables and connectors Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 55 OC3/STM1 ATM Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination OC3/STM1 ATM Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination OCx/STMx ATM or OCx/STMx /DS3-ATM Line module label 4XOC3 I/O module label APS I/O SINGLE MODE 4 active, 4 redundant Number of I/O ports First supported: 5.1.2, 5.2.0 (APS/MSP) Software release...
  • Page 56 ERX 11.1.x Module Guide LC full duplex Cables and connectors Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 57 OC3/STM1 ATM Single-Mode Long Reach Without APS/MSP Redundancy Module Combination (256-MB Memory) OC3/STM1 ATM Single-Mode Long Reach Without APS/MSP Redundancy Module Combination (256-MB Memory) OCx/STMx ATM or OCx/STMx /DS3-ATM Line module label OC3-4 I/O I/O module label LONG HAUL Number of I/O ports First supported: 5.0.0, 5.3.0 or a higher-numbered release Software release Final supported: Not applicable...
  • Page 58 ERX 11.1.x Module Guide SC full duplex Cables and connectors Tx power: min: –5.0 dBm max: 0 dBm Center wavelength: 1310 nm Rx input power: min: –34 dBm max: –7 dBm Rated for 40 km (24.8 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 59 OC3/STM1 GE/FE Module Combination OC3/STM1 GE/FE Module Combination OC3/STM1 GE/FE Line module label OC3-2 GE APS I/O I/O module label 3; one active and one redundant port per SFP Number of I/O ports Ports 0 and 1 ATM interfaces Port 2 GE interface Port redundancy is not supported.
  • Page 60 ERX 11.1.x Module Guide LC-style fiber-optic connectors Cables and connectors (ATM Tx power: min: –19.0 dBm max: –14dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9db or over 50-micron core cable with an optical loss of 7 db See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 61 OC3/STM1 GE/FE Module Combination LC full duplex Cables and connectors (GE single mode LX40) Tx power: min: –4.5 dBm max: –0 dBm Center wavelength: 1300 nm Rx input power: min: –35 dBm max: –22.5 dBm Rated for 40 km (28.85 miles) over 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 62 ERX 11.1.x Module Guide Table 10: Single-strand SFPs Pairing (continued) Fiber Type Nominal Wavelength (nm) Maximum Operating Range (kilometers) 9 microns TX 1550 / RX 1310 10 (6.2 miles), matching SFP must have the same operating range Pairs with TX 1310, RX 1550 9 microns TX 1310, RX 1490 10 (6.2 miles), matching SFP must have...
  • Page 63 OC3/STM1 POS Multimode Without APS/MSP Redundancy Module Combination OC3/STM1 POS Multimode Without APS/MSP Redundancy Module Combination OCx/STMx POS Line module label OC3-4 I/O I/O module label MULTI MODE Number of I/O ports First supported: 2.0.0 Software release Final supported: Not applicable 120 W Description Unchannelized, concatenated OC3/STM1 for POS...
  • Page 64 ERX 11.1.x Module Guide SC full duplex Cables and connectors Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 65 OC3/STM1 POS Multimode With APS/MSP Redundancy Module Combination OC3/STM1 POS Multimode With APS/MSP Redundancy Module Combination OCx/STMx POS Line module label 4XOC3 I/O module label APS I/O MULTI MODE 4 active, 4 redundant Number of I/O ports First supported: 5.1.2, 5.2.0 (APS/MSP) Software release Final supported: Not applicable 120 W...
  • Page 66 ERX 11.1.x Module Guide LC full duplex Cables and connectors Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 67 OC3/STM1 POS Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination OC3/STM1 POS Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination OCx/STMx POS Line module label OC3-4 I/O I/O module label SINGLE MODE Number of I/O ports First supported: 2.0.0 Software release Final supported: Not applicable 120 W Description...
  • Page 68 ERX 11.1.x Module Guide See “Module LEDs” on page 133. LEDs See Monitoring SONET/SDH Interfaces in JUNOSe Physical Layer Configuration Alarms, errors, and events Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. OC3/STM1 POS Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination...
  • Page 69 OC3/STM1 POS Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination OC3/STM1 POS Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination OCx/STMx POS Line module label 4XOC3 I/O module label APS I/O SINGLE MODE 4 active, 4 redundant Number of I/O ports First supported: 5.1.2, 5.2.0 (APS/MSP) Software release Final supported: Not applicable...
  • Page 70 ERX 11.1.x Module Guide LC full duplex Cables and connectors Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 71 OC3/STM1 POS Single-Mode Long Reach Module Combination OC3/STM1 POS Single-Mode Long Reach Module Combination OCx/STMx POS Line module label OC3-4 I/O I/O module label LONG HAUL Number of I/O ports First supported: 2.0.0 Software release Final supported: Not applicable 120 W Description Unchannelized, concatenated OC3/STM1 for POS EFA ASIC...
  • Page 72 ERX 11.1.x Module Guide See “Module LEDs” on page 133. LEDs See Monitoring SONET/SDH Interfaces in JUNOSe Physical Layer Configuration Alarms, errors, and events Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. OC3/STM1 POS Single-Mode Long Reach Module Combination...
  • Page 73 OC12/STM4 ATM Multimode Without APS/MSP Redundancy Module Combination (256-MB Memory) OC12/STM4 ATM Multimode Without APS/MSP Redundancy Module Combination (256-MB Memory) OCx/STMx ATM or OCx/STMx /DS3-ATM Line module label OC12 STM4 I/O I/O module label MULTI MODE Number of I/O ports First supported: 5.0.0, 5.3.0 or a higher-numbered release Software release Final supported: Not applicable...
  • Page 74 ERX 11.1.x Module Guide SC full duplex Cables and connectors Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 75 OC12/STM4 ATM Multimode With APS/MSP Redundancy Module Combination OC12/STM4 ATM Multimode With APS/MSP Redundancy Module Combination OCx/STMx ATM or OCx/STMx /DS3-ATM Line module label OC12 STM4 APS I/O module label MULTI MODE 1 active, 1 redundant Number of I/O ports First supported: 2.0.0 (128 MB), 5.0.0 (256 MB) Software release Final supported: Not applicable...
  • Page 76 ERX 11.1.x Module Guide SC full duplex Cables and connectors Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 77 OC12/STM4 ATM Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination (256-MB Memory) OC12/STM4 ATM Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination (256-MB Memory) OCx/STMx ATM or OCx/STMx /DS3-ATM Line module label OC12 STM4 I/O I/O module label SINGLE MODE Number of I/O ports First supported: 5.0.0, 5.3.0 or a higher-numbered release Software release...
  • Page 78 ERX 11.1.x Module Guide SC full duplex Cables and connectors Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 79 OC12/STM4 ATM Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination OC12/STM4 ATM Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination OCx/STMx ATM or OCx/STMx /DS3-ATM Line module label OC12 STM4 APS I/O module label SINGLE MODE 1 active, 1 redundant Number of I/O ports First supported: 2.0.0 (128 MB), 5.0.0 (256 MB) Software release...
  • Page 80 ERX 11.1.x Module Guide SC full duplex Cables and connectors Tx power: min: –15 dBm max: –8 dBm Center wavelength: 1310 nm Rx input power: min: –31 dBm max: –8 dBm Rated for 15 km (9.3 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 81 OC12/STM4 ATM Single-Mode Long Reach Without APS/MSP Redundancy Module Combination (256-MB Memory) OC12/STM4 ATM Single-Mode Long Reach Without APS/MSP Redundancy Module Combination (256-MB Memory) OCx/STMx ATM or OCx/STMx /DS3-ATM Line module label OC12 STM4 I/O I/O module label LONG HAUL Number of I/O ports First supported: 5.0.0, 5.3.0 or a higher-numbered release Software release...
  • Page 82 ERX 11.1.x Module Guide SC full duplex Cables and connectors Tx power: min: –5.0 dBm max: 0 dBm Center wavelength: 1310 nm Rx input power: min: –34 dBm max: –7 dBm Fiber type: 9-micron core Rated for 40 km (24.8 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 83 OC12/STM4 ATM Single-Mode Long Reach With APS/MSP Redundancy Module Combination OC12/STM4 ATM Single-Mode Long Reach With APS/MSP Redundancy Module Combination OCx/STMx ATM or OCx/STMx /DS3-ATM Line module label OC12 STM4 APS I/O module label LONG HAUL 1 active, 1 redundant Number of I/O ports First supported: 2.0.0 (128 MB), 5.0.0 (256 MB) Software release...
  • Page 84 ERX 11.1.x Module Guide SC full duplex Cables and connectors Tx power: min: –5.0 dBm max: 0 dBm Center wavelength: 1310 nm Rx input power: min: –34 dBm max: –7 dBm Fiber type: 9-micron core Rated for 40 km (24.8 miles) of 9-micron core cable See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 85 OC12/STM4 POS Multimode Without APS/MSP Redundancy Module Combination OC12/STM4 POS Multimode Without APS/MSP Redundancy Module Combination OCx/STMx POS Line module label OC12 STM4 I/O I/O module label MULTI MODE Number of I/O ports First supported: 2.0.0 Software release Final supported: Not applicable 120 W Description Unchannelized, concatenated OC12/STM4 for POS...
  • Page 86 ERX 11.1.x Module Guide SC full duplex Cables and connectors Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 87 OC12/STM4 POS Multimode With APS/MSP Redundancy Module Combination OC12/STM4 POS Multimode With APS/MSP Redundancy Module Combination OCx/STMx POS Line module label OC12 STM4 APS I/O module label MULTI MODE 1 active, 1 redundant Number of I/O ports First supported: 2.0.0 Software release Final supported: Not applicable 120 W...
  • Page 88 ERX 11.1.x Module Guide SC full duplex Cables and connectors Tx power: min: –19 dBm max: –14 dBm Center wavelength: 1310 nm Rx input power: min: –30 dBm max: –14 dBm Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9 dB or 50-micron core cable with an optical loss of 7 dB See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
  • Page 89 OC12/STM4 POS Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination OC12/STM4 POS Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination OCx/STMx POS Line module label OC12 STM4 I/O I/O module label SINGLE MODE Number of I/O ports First supported: 2.0.0 Software release Final supported: Not applicable 120 W...
  • Page 90 ERX 11.1.x Module Guide See “Module LEDs” on page 133. LEDs See Monitoring SONET/SDH Interfaces in JUNOSe Physical Layer Configuration Alarms, errors, and events Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. OC12/STM4 POS Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination...
  • Page 91 OC12/STM4 POS Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination OC12/STM4 POS Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination OCx/STMx POS Line module label OC12 STM4 APS I/O module label SINGLE MODE 1 active, 1 redundant Number of I/O ports First supported: 2.0.0 Software release Final supported: Not applicable...
  • Page 92 ERX 11.1.x Module Guide See “Module LEDs” on page 133. LEDs See Monitoring SONET/SDH Interfaces in JUNOSe Physical Layer Configuration Alarms, errors, and events Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. OC12/STM4 POS Single-Mode Intermediate Reach With APS/MSP Redundancy Module Combination...
  • Page 93 OC12/STM4 POS Single-Mode Long Reach Without APS/MSP Redundancy Module Combination OC12/STM4 POS Single-Mode Long Reach Without APS/MSP Redundancy Module Combination OCx/STMx POS Line module label OC12 STM4 I/O I/O module label LONG HAUL Number of I/O ports First supported: 2.0.0 Software release Final supported: Not applicable 120 W...
  • Page 94 ERX 11.1.x Module Guide See “Module LEDs” on page 133. LEDs See Monitoring SONET/SDH Interfaces in JUNOSe Physical Layer Configuration Alarms, errors, and events Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. OC12/STM4 POS Single-Mode Long Reach Without APS/MSP Redundancy Module Combination...
  • Page 95 OC12/STM4 POS Single-Mode Long Reach With APS/MSP Redundancy Module Combination OC12/STM4 POS Single-Mode Long Reach With APS/MSP Redundancy Module Combination OCx/STMx POS Line module label OC12 STM4 APS I/O module label LONG HAUL 1 active, 1 redundant Number of I/O ports First supported: 2.0.0 Software release Final supported: Not applicable...
  • Page 96 ERX 11.1.x Module Guide See “Module LEDs” on page 133. LEDs See Monitoring SONET/SDH Interfaces in JUNOSe Physical Layer Configuration Alarms, errors, and events Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces. OC12/STM4 POS Single-Mode Long Reach With APS/MSP Redundancy Module Combination...
  • Page 97 OC48/STM16 POS Single-Mode Short Reach Module Combination OC48/STM16 POS Single-Mode Short Reach Module Combination OC48 Line module label OC48 FRAME APS I/O module label Number of I/O ports First supported: 4.1.x Software release Final supported: Not applicable 120 W Description Unchannelized, concatenated OC48/STM16 for POS FFA ASIC Type...
  • Page 98 ERX 11.1.x Module Guide Service Module (SM) Module Combination SERVICE MODULE Line module label No I/O module I/O module label Not applicable Number of I/O ports First supported: 5.1.0 Software release Final supported: Not applicable 130 W Description Tunnel Service for IP tunnels, L2F tunnels, and LNS termination EFA ASIC Type IP tunnels...
  • Page 99 SRP-5G+ Module Combination (1-GB Memory) SRP-5G+ Module Combination (1-GB Memory) SRP-5G+ Line module label SRP I/O I/O module label Number of I/O ports First supported: 4.1.3 or later 4.1.x release, 5.0.4 or later 5.0.x release, 5.1.2 Software release or higher-numbered release, 5.2.0 Final supported: Not applicable 125 W Description...
  • Page 100 ERX 11.1.x Module Guide SRP-5G+ Module Combination (2-GB Memory) SRP-5G+ Line module label SRP I/O I/O module label Number of I/O ports First supported: 4.1.3 or later 4.1.x release, 5.0.4 or later 5.0.x release, 5.1.2 Software release or higher-numbered release, 5.2.0 Final supported: Not applicable 125 W Description...
  • Page 101 SRP-10G Module Combination (2-GB Memory) SRP-10G Module Combination (2-GB Memory) SRP-10G Line module label SRP I/O I/O module label Number of I/O ports First supported: 4.1.3 or later 4.1.x release, 5.0.4 or later 5.0.x release, 5.1.2 Software release or higher-numbered release, 5.2.0 Final supported: Not applicable 125 W Description...
  • Page 102 ERX 11.1.x Module Guide SRP-40G PLUS Module Combination (2-GB Memory) SRP-40G PLUS Line module label SRP I/O I/O module label Number of I/O ports First supported: 4.0.0 Software release Final supported: Not applicable 210 W Description Switch route processor (40 Gbps) Has a minimum of 2 GB of error checking and correction (ECC) memory with a 1-GB nonvolatile storage (NVS) card.
  • Page 103 SRP-SE10G Module Combination (1-GB Memory) SRP-SE10G Module Combination (1-GB Memory) SRP-SE10G Line module label SRP-SE I/O I/O module label Number of I/O ports First supported: 5.3.0 Software release Final supported: Not applicable 35 W Description Switch route processor for ERX310 router only (10 Gbps) Not applicable Type Ethernet (IEEE 802.3)
  • Page 104 ERX 11.1.x Module Guide T3 ATM Module Combination (4 Ports) OCx/STMx ATM or OCx/STMx /DS3-ATM Line module label 4xDS3 ATM I/O I/O module label Number of I/O ports First supported: 4.1.0 (128 MB), 5.0.0 (256 MB) Software release Final supported: Not applicable 130 W Description Can use either the 128-MB OCx/STMx ATM line module or the 256-MB OCx/STMx...
  • Page 105 T3 Frame Module Combination (12 Ports) T3 Frame Module Combination (12 Ports) COCX-F3 Line module label CT3/T3 12 I/O I/O module label Number of I/O ports First supported: 4.0.2 Software release Final supported: Not applicable 135 W Description Unchannelized T3 for Frame EFA ASIC Type Capability...

  • Page 106: Table Of Contents

    Juniper Networks. If you use a feature before it has been fully qualified, it is your responsibility to ensure that it operates correctly in your targeted configuration.
  • Page 107 ERX 11.1.x Module Guide Table 11: Channelized OCx/STMx Modules (continued) cOCx FO Line Module with cOCx FO Line Module with Protocol or Application cOC3/STM1 Modules cOC12/STM4 FO I/O Modules BGP/MPLS VPNs Bridged Ethernet Bridged IP Cisco HDLC DHCP external server DHCP local server Dynamic interfaces DVMRP and GRE support access side...
  • Page 108 Appendix A: Module Protocol Support Table 11: Channelized OCx/STMx Modules (continued) cOCx FO Line Module with cOCx FO Line Module with Protocol or Application cOC3/STM1 Modules cOC12/STM4 FO I/O Modules L2TP/IPSec LAC support access side LAC support peer side LNS support peer side Local loopback MDL (maintenance data link) Mobile IP home agent...

  • Page 109: Channelized Ocx/Stmx Modules

    ERX 11.1.x Module Guide Table 11: Channelized OCx/STMx Modules (continued) cOCx FO Line Module with cOCx FO Line Module with Protocol or Application cOC3/STM1 Modules cOC12/STM4 FO I/O Modules VRRP Channelized T3 Modules Table 12: Channelized T3 Modules CT3/T3-F0 Line Modules with Protocol or Application CT3/T3 12 I/O Modules Accepts traffic destined for GRE tunnels or DVMRP (IP-in-IP) tunnels...
  • Page 110 Appendix A: Module Protocol Support Table 12: Channelized T3 Modules (continued) CT3/T3-F0 Line Modules with Protocol or Application CT3/T3 12 I/O Modules IEEE 802.3ah OAM link-fault management IP multicast IP reassembly for tunneled packets IPSec IPv6 IPv6 multicast IPv6 neighbor discovery IS-IS J-Flow Statistics L2TP/IPSec...

  • Page 111: Ethernet Modules

    ERX 11.1.x Module Guide Table 12: Channelized T3 Modules (continued) CT3/T3-F0 Line Modules with Protocol or Application CT3/T3 12 I/O Modules Remote loopback Subscriber interfaces (static) Subscriber interfaces (dynamic) Transparent bridging Tunnel-server ports Unified ISSU VPLS (network interfaces) VPLS (virtual core interfaces) VRRP Ethernet Modules Table 13: Fast Ethernet Modules...
  • Page 112 Appendix A: Module Protocol Support Table 13: Fast Ethernet Modules (continued) Protocol or Application GE/FE Line Module with FE-8 I/O and FE-8 SFP I/O Modules DVMRP and GRE support access side DVMRP and GRE support server side Dynamic interfaces Ethernet raw mode encapsulation in Martini layer 2 circuits F4 OAM and F5 OAM (ATM administration) FDL (facilities data link) Firewall...
  • Page 113 ERX 11.1.x Module Guide Table 13: Fast Ethernet Modules (continued) Protocol or Application GE/FE Line Module with FE-8 I/O and FE-8 SFP I/O Modules MPLS MPLS L2VPNs over the LAGs configured between customer edge (CE) and provider edge (PE) devices Multilink Frame Relay Multilink PPP Network Address Translation (NAT)
  • Page 114 Appendix A: Module Protocol Support Table 14: Gigabit Ethernet Modules GE-2 Line Module or GE-HDE Line Module with GE-2 SFP GE/FE Line Modules with GE I/O (formerly GE-2 APS I/O GE-HDE Line Module with Protocol or Application I/O Modules or 2XGE APS I/O) GE-8 I/O Modules Accepts traffic destined for GRE tunnels or DVMRP...
  • Page 115 ERX 11.1.x Module Guide Table 14: Gigabit Ethernet Modules (continued) GE-2 Line Module or GE-HDE Line Module with GE-2 SFP I/O (formerly GE-2 APS I/O GE/FE Line Modules with GE GE-HDE Line Module with Protocol or Application I/O Modules or 2XGE APS I/O) GE-8 I/O Modules IEEE 802.3ad link aggregation IEEE 802.3ah OAM link-fault...
  • Page 116 Appendix A: Module Protocol Support Table 14: Gigabit Ethernet Modules (continued) GE-2 Line Module or GE-HDE Line Module with GE-2 SFP I/O (formerly GE-2 APS I/O GE/FE Line Modules with GE GE-HDE Line Module with Protocol or Application I/O Modules or 2XGE APS I/O) GE-8 I/O Modules Network Address Translation...

  • Page 117: Ocx/Stmx Ge/Fe Modules

    ERX 11.1.x Module Guide OCx/STMx GE/FE Modules Table 15: OCx/STMx GE/FE Modules OCx/STMx GE/FE Line OCx/STMx GE/FE Line Modules Modules with OC3-2 GE APS with OC3-2 GE APS I/O Modules I/O Modules Protocol or Application (OC3/STM1 ATM Interfaces) (Gigabit Ethernet Interfaces) Accepts traffic destined for GRE tunnels or DVMRP (IP-in-IP) tunnels APS/MSP...
  • Page 118 Appendix A: Module Protocol Support Table 15: OCx/STMx GE/FE Modules (continued) OCx/STMx GE/FE Line OCx/STMx GE/FE Line Modules Modules with OC3-2 GE APS with OC3-2 GE APS I/O Modules I/O Modules Protocol or Application (OC3/STM1 ATM Interfaces) (Gigabit Ethernet Interfaces) IP multicast IP reassembly for tunneled packets IPSec...

  • Page 119: Ocx/Stmx Atm Modules

    ERX 11.1.x Module Guide Table 15: OCx/STMx GE/FE Modules (continued) OCx/STMx GE/FE Line OCx/STMx GE/FE Line Modules Modules with OC3-2 GE APS with OC3-2 GE APS I/O Modules I/O Modules Protocol or Application (OC3/STM1 ATM Interfaces) (Gigabit Ethernet Interfaces) PPPoE Remote loopback Subscriber interfaces (static) Yes (over bridged Ethernet and...
  • Page 120 Appendix A: Module Protocol Support Table 16: OCx/STMx ATM Modules (continued) OCx/STMx ATM Line Modules OCx/STMx ATM Line Modules Protocol or Application with OC3-4 I/O Modules with OC12/STM4 I/O Modules Bridged IP Cisco HDLC DHCP external server DHCP local server DVMRP and GRE support access side DVMRP and GRE support server side Dynamic interfaces...
  • Page 121 ERX 11.1.x Module Guide Table 16: OCx/STMx ATM Modules (continued) OCx/STMx ATM Line Modules OCx/STMx ATM Line Modules Protocol or Application with OC3-4 I/O Modules with OC12/STM4 I/O Modules Local loopback MDL (maintenance data link) Mobile IP home agent MPLS Multilink Frame Relay Multilink PPP Yes (with fragmentation and...

  • Page 122: Ocx/Stmx Pos And Oc48 Modules

    Appendix A: Module Protocol Support OCx/STMx POS and OC48 Modules Table 17: OCx/STMx POS and OC48 Modules OCx/STMx POS Line OCx/STMx POS Line OC48 Line Module with Modules with OC3-4 I/O Modules with OC48 Frame APS I/O Protocol or Application Modules OC12/STM4 I/O Modules Module...
  • Page 123 ERX 11.1.x Module Guide Table 17: OCx/STMx POS and OC48 Modules (continued) OCx/STMx POS Line OCx/STMx POS Line OC48 Line Module with Modules with OC3-4 I/O Modules with OC48 Frame APS I/O Protocol or Application Modules OC12/STM4 I/O Modules Module IEEE 802.3ah OAM link-fault management IP multicast IP reassembly for tunneled packets...

  • Page 124: Service Modules

    Appendix A: Module Protocol Support Table 17: OCx/STMx POS and OC48 Modules (continued) OCx/STMx POS Line OCx/STMx POS Line OC48 Line Module with Modules with OC3-4 I/O Modules with OC48 Frame APS I/O Protocol or Application Modules OC12/STM4 I/O Modules Module PPPoE Remote loopback...
  • Page 125 ERX 11.1.x Module Guide Table 18: Service Modules (continued) Protocol or Application Service Line Module (SM) IPSec Service Line Module Cisco HDLC DHCP external server DHCP local server DVMRP and GRE support access side DVMRP and GRE support server side Yes (over dedicated tunnel server ports) Yes (over dedicated tunnel server ports;...
  • Page 126 Appendix A: Module Protocol Support Table 18: Service Modules (continued) Protocol or Application Service Line Module (SM) IPSec Service Line Module Local loopback MDL (maintenance data link) Mobile IP home agent MPLS No (over GRE only) No (over GRE only) Multilink Frame Relay Multilink PPP Yes (with fragmentation and reassembly;...

  • Page 127: Unchannelized E3 Modules

    ERX 11.1.x Module Guide Unchannelized E3 Modules Table 19: Unchannelized E3 Modules COCX-F3 Line Modules with E3-12 FRAME Protocol or Application I/O Modules Accepts traffic destined for GRE tunnels or DVMRP (IP-in-IP) tunnels APS/MSP ATM (point-to-point) BERT BGP/MPLS VPNs Bridged Ethernet Bridged IP Cisco HDLC DHCP external server...
  • Page 128 Appendix A: Module Protocol Support Table 19: Unchannelized E3 Modules (continued) COCX-F3 Line Modules with E3-12 FRAME Protocol or Application I/O Modules IP reassembly for tunneled packets IPSec IPv6 IPv6 multicast IPv6 neighbor discovery IS-IS J-Flow Statistics L2TP/IPSec LAC support access side LAC support peer side LNS support peer side Local loopback...

  • Page 129: Unchannelized T3 Modules

    ERX 11.1.x Module Guide Table 19: Unchannelized E3 Modules (continued) COCX-F3 Line Modules with E3-12 FRAME Protocol or Application I/O Modules Subscriber interfaces (static) Subscriber interfaces (dynamic) Transparent bridging Tunnel-server ports Unified ISSU VPLS (network interfaces) VPLS (virtual core interfaces) VRRP Unchannelized T3 Modules Table 20: Unchannelized T3 Modules...
  • Page 130 Appendix A: Module Protocol Support Table 20: Unchannelized T3 Modules (continued) OCx/STMx ATM Line CT3/T3-F0 Line Modules COCX-F3 Line Modules with Modules with 4xDS3 ATM with CT3/T3 12 I/O Protocol or Application CT3/T3 12 I/O Modules I/O Modules Modules DVMRP and GRE support access side DVMRP and GRE support access side...
  • Page 131 ERX 11.1.x Module Guide Table 20: Unchannelized T3 Modules (continued) OCx/STMx ATM Line CT3/T3-F0 Line Modules COCX-F3 Line Modules with Modules with 4xDS3 ATM with CT3/T3 12 I/O Protocol or Application CT3/T3 12 I/O Modules I/O Modules Modules MDL (maintenance data link) Mobile IP home agent MPLS Yes (over PPP and Cisco...
  • Page 132 Appendix B Module LEDs This appendix describes the LEDs found on ERX modules. Module LEDs can show you the current status of a module and alert you to a problem with the module or one of its ports. We recommend that you familiarize yourself with LED activity so that you can easily detect and correct a module-related problem with minimal or no system downtime.
  • Page 133 ERX 11.1.x Module Guide Table 21: LED Identification and Activity Descriptions (continued) Location LED Label LED Indicator LED Color OFF to ON ON to OFF REDUNDANT Redundancy Green See Redundancy Status later in this appendix. modules NOTE: The REDUNDANT LED on the cOCx/STMx, FE-8, GE/FE, HSSI, and X.21/V.35 line modules is nonfunctional.
  • Page 134 Appendix B: Module LEDs Table 21: LED Identification and Activity Descriptions (continued) Location LED Label LED Indicator LED Color OFF to ON ON to OFF X.21/V.35 ACTIVE Port status Green Port configured Port not configured line module LOOPBK Port status Yellow Port in local loopback or Port not in loopback...
  • Page 135 ERX 11.1.x Module Guide Figure 1: SRP Module LEDs NOTE: The primary SRP module illuminates the REDUNDANT LED only when the SRP module detects that there is a secondary or standby SRP module online. The standby SRP module monitors an activity signal from the primary SRP module to determine its state;...
  • Page 136 Appendix B: Module LEDs Figure 2: FE2 Module LEDs Figure 3: E3 and T3 Module LEDs Redundancy Status You can determine the redundancy state of line modules by examining the online and redundant status LEDs (ERX7xx/14xx models only). See Table 22 on page 138. Redundancy Status...
  • Page 137 ERX 11.1.x Module Guide NOTE: The REDUNDANT LED on the cOCx/STMx, FE-8, GE/FE, and HSSI modules is nonfunctional. Table 22: Redundancy Status of a Line Module ONLINE LED REDUNDANT LED State of the Line Module Module is booting or is an inactive primary line module. Module is active, but no standby module is available.
  • Page 138 Appendix C Module Name Cross-Reference Information Module Name Cross-Reference Information on page 139 Module Name Cross-Reference Information Use Table 23 on page 139 to find the label name, software display name, and model number of a module. Table 23: Module Naming Reference Label Name Software Display Name Model Number...
  • Page 139 ERX 11.1.x Module Guide Table 23: Module Naming Reference (continued) Label Name Software Display Name Model Number GE/FE GE/FE ERX-GEFE256M-MOD GE-HDE GE-HDE-8 ERX-HDE-MOD GE-HDE GE-HDE-8 ERX-GE-MOD OC3/STM1 GE/FE 2xOC3-ATM 1xGE I/O ERX-OCXGE-MOD Service Modules IPSEC SERVICE IPsec ERX-IPSECURE-MOD SERVICE MODULE SERVICE MODULE ERX-SERVICE-MOD I/O Modules...
  • Page 140 Appendix C: Module Name Cross-Reference Information Table 23: Module Naming Reference (continued) Label Name Software Display Name Model Number cOC3 STM1 F0 I/O SINGLE MODE COC3–4SM I/O COC3F0–SM-I/O FE-8 I/O SFP FE-8 SFP FX I/O ERX-8FXSFP-IOA FE-8 I/O FE-8 I/O FE-8–I/O OC3-2 GE APS I/O SFP OC3-2A GE...
  • Page 141 ERX 11.1.x Module Guide Module Name Cross-Reference Information...

  • Page 142: Product Reclamation And Recycling Program

    Product Reclamation and Recycling Program on page 143 Product Reclamation and Recycling Program Juniper Networks is committed to environmentally responsible behavior. As part of this commitment, we continually work to comply with environmental standards such as the European Union’s Waste Electrical and Electronic Equipment (WEEE) Directive and Restriction of Hazardous Substances (RoHS) Directive.
  • Page 143 ERX 11.1.x Module Guide Products returned through our reclamation process are recycled, recovered, or disposed of in a responsible manner. Our packaging is designed to be recycled and should be handled in accordance with your local recycling policies. Product Reclamation and Recycling Program...
  • Page 145 Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.

This manual is also suitable for:

Erx

Table of Contents