Scenario: Ipsec Remote-Access Vpn Configuration; Example Ipsec Remote-Access Vpn Network Topology - Cisco ASA 5505 Getting Started Manual

Example IPSec Remote-Access VPN Network
Topology
78-17612-02
Scenario: IPSec Remote-Access VPN
Configuration
This chapter describes how to use the adaptive security appliance to accept
remote-access IPSec VPN connections. A remote-access VPN allows you to
create secure connections, or tunnels, across the Internet, which provides secure
access to off-site users.
If you are implementing an Easy VPN solution, this chapter describes how to
configure the Easy VPN server (sometimes called a headend device).
This chapter includes the following sections:
Example IPSec Remote-Access VPN Network Topology, page 7-1
•
Implementing the IPSec Remote-Access VPN Scenario, page 7-2
•
What to Do Next, page 7-18
•
Figure 7-1 shows an adaptive security appliance configured to accept requests
from and establish IPSec connections with VPN clients, such as a Cisco Easy
VPN software or hardware clients, over the Internet.
C H A P T E R
Cisco ASA 5505 Getting Started Guide
7
7-1