Oki CX1145 MFP Function Manual page 203

6 Menu Functions (Web utility)
Shift Margin
- Front — Specify the width of margin added to the front page.
- Back — Specify the width of margin added to the back page. This applies only when
enabling the duplex printing.
15) Use Front Cover
This sets front cover printing which allows you to insert or print a cover on a sheet fed from a
different tray than the Paper Source option.
To enable cover printing, check on the box and select the location from where a cover sheet
is to be fed and the print style to be used.
Source
Select the location from where a cover sheet is to be fed. When "Auto" is selected, the paper
is automatically selected according to the printed document size.
When selecting the Bypass Tray in the Source drop down box, the message "Press JOB
STATUS button" will be displayed in the touch panel. When pressing the [JOB STATUS]
button, the message "Place Paper in the Bypass tray Press the START button" will be
displayed. Then place the paper in the Bypass tray and press the [START] button.
The selectable values in the Source drop down box vary depending on the optional
devices installed on this equipment.
Print Style
This selects how you want to print a cover.
- Do not print on page — Select this to insert a blank cover.
- Print on 1 side of page — Select this to print the first page image on the front side of a
cover.
- Print on both sides of page — Select this to print the first two page images on both
sides of a cover. This is available only when the Duplex option is set to either "Book" or
"Tablet"
If "Print on 1 side of page" is selected while the Duplex option is set to either "Book" or "Tab-
let", the first page is printed on the front side of the cover sheet and the back side of the
cover will be blank.
16) Use Back Cover
This sets back cover printing which allows you to insert or print a back cover on a sheet fed
from a different tray than the Paper Source option.
To enable back cover printing, check on the box and select the location from where a back
cover sheet is to be fed and the print style to be used.
Source
Select the location from where a back cover sheet is to be fed. When "Auto" is selected, the
paper is automatically selected according to the printed document size.
When selecting the Bypass Tray in the Source drop down box, the message "Press JOB
STATUS button" will be displayed in the touch panel. When pressing the [JOB STATUS]
button, the message "Place Paper in the Bypass tray Press the START button" will be
displayed. Then place the paper in the Bypass tray and press the [START] button.
The selectable values in the Source drop down box vary depending on the optional
devices installed on this equipment.
202 File Menu Functions