Oki CX1145 MFP Function Manual page 182

Configuring Discovery Settings
You can configure the discovery settings.
1) Devices
Click the arrow button to display the poll down list and check the model name that you want
to search.
This software can backup or restore the data only from the OKI 1100 series MFP.
2) Network - Enable IPX/SPX Search
This is disabled because the e-Filing Backup/Restore Utility does not support the IPX/SPX
connection.
3) Network - Enable TCP/IP Search
Select this to search for devices connected to the TCP/IP network. This is available only
when the TCP/IP protocol is installed.
When this is enabled, select how it searches devices in the TCP/IP network.
- Search local subnet — Select this to search devices in local subnet.
- Specify a range — Select this to search devices in specific range of IP addresses.
When this is selected, enter the IP addresses in "From" field and "To" field to specify the
range.
- IPV4 — Select this to search for devices set with an IPv4 address.
- IPV6 — Select this to search for devices set with an IPv6 address.
Using e-Filing Backup/Restore Utility 181