Adding A New Device Using Network Discovery - Oki CX1145 MFP Function Manual

E-filing guide
Hide thumbs Also See for CX1145 MFP:
Table of Contents

Advertisement

— Shrinking Documents
The Shrink to Half function allows you to retrieve a 600x600dpi document as a 300x300dpi doc-
ument. This feature is only available for the documents that are originally stored to the e-Filing
by the Copy to e-Filing or Print to e-Filing feature. Because the Copy to e-Filing and Print to e-
Filing documents are always stored as the 600x600 dpi documents, the Shrink to Half function
allows you to convert the 600x600 dpi documents to the 300x300 dpi for retrieval.
The Shrink to Half function reduces the resolution of the Copy to e-Filing and Print to e-Filing
documents for retrieval. The actual data in e-Filing will not be reduced.
The Shrink to Half function applies to only the 600x600dpi documents that were stored by
Copy or Print operations. This function does not apply to the documents that were stored by
Scan or Fax operations.
Shrinking a document to half size
1
Click the [Edit] menu and select [Shrink to Half].
The check mark will be displayed in the menu. This means the Shrink to Half function
is enabled. All documents will be retrieved at 300x300 dpi.
You can cancel shrinking by selecting the command again.

— Adding a New Device Using Network Discovery

You can add a new connection to other equipment by searching the equipment in your network.
This enables you to add several devices that you can connect using the TWAIN driver and File
Downloader.
To add a new connection, click the [Box Select] menu and select [Device Discovery]. The Doc-
umnet Monitor Local Discovery dialog box appears and discovers the devices in your network to
add a new connection. For further instruction on how to discover the devices using the Docu-
ment Monitor Local Discovery dialog box, see the following section.
P.149 "When You Are Running the First Time"
After you add other devices in the connection list, you can change the target equipment by
selecting the [Select OKI] command under the [Box Select] menu.
P.168 "Changing the Target Device for Retrieving e-Filing Documents"
Retrieving e-Filing Documents
167

Advertisement

Table of Contents
loading

Table of Contents