Setting The Print Calibration - Oki CX1145 MFP User Functions Manual

Setting the Print Calibration

This function allows the machine automatically to calibrate the color gradation for print jobs when the color
cannot be adjusted well because the shading or the hue of the image has deviated. You can calibrate for
the PostScript and PCL separately. In addition, you can calibrate for 600 dpi and 1200 dpi print jobs for
each emulation separately.
• Set the LT-sized or A4-sized paper (recommended paper) in the cassette before starting the calibra-
tion. If any other paper is used, calibration may not be performed properly.
• If the color often deviates, call your service technician.
• The print calibration setting in the [USER] menu can be configured only when an administrator has set
the Calibration Display Level to [USER].
P.128 "Setting the Calibration Display Level"
• If jobs such as private print, reserved copy/print or invalid department job are left in the equipment, the
message "Not allowed now" is displayed on the touch panel and this function cannot be performed. In
this case, try again after deleting all the jobs left in the equipment.
• If the glass is dirty or any foreign objects are stuck to the glass, the calibration may not be carried out
properly. Keep the glass clean.
• Never raise the original cover or the optional Automatic Document Feeder, or open the front cover
while the calibration is in progress. If this does happen, the calibration cannot be finished appropriately.
• Interrupt copying is not available during the calibration.
1
Place the LT-size or A4-size paper in the cassette.
2
Press the [USER FUNCTIONS] button on the control panel to enter the
User Functions menu.
3
Press the [USER] button, and then press the [GENERAL] button on
the touch panel.
• The GENERAL menu is displayed.
3
87