Buzzer Output - Digimerge DHU104 Series Instruction Manual

ALARM OUTPUT
• Duration - Sets the Reacted Relay
Time. (5sec~5min or Until key-in)
• HDD Event - Turns the Alarm ON/OFF
when the Hard Drive experiencing
problems.
• Alarm - Sends the Alarm Out when an
Alarm Event is detected (set to ON/
OFF).
• Video Loss - Sends the Alarm Out
when a Video Loss Event is detected
(set to ON/OFF).
• Motion - Sends the Alarm Out when a
Motion Event is detected (set to ON/
OFF).

BUZZER OUTPUT

Generates a Buzzer when an alarm is
detected.
• Operation - Enables / Disables the
buzzer for selected Event / Alarm
types.
• Mode - Set the Reacted Relay to either
Latched or Transparent Mode.
• HDD Event - Generates a Buzzer alert
when a Hard Drive event occurs (set to
ON/OFF).
• Duration - Sets the Buzzer time (5sec
~ 5min or until a user logs into the
system).
• Alarm - Generates a Buzzer Alarm
when an Alarm Event is detected (set
to ON/OFF).
• Video Loss - Generates a Buzzer
Alarm when a Video Loss Event is
detected (set to ON/OFF).
• Motion - Generates a Buzzer Alarm
when a Motion Event is detected (set
to ON/OFF).
Event / Sensor
35