Appendix 10: Using Listen-In Audio - Digimerge DHU104 Series Instruction Manual

Appendix 10: Using Listen-In Audio

How do I enable Listen-In Audio, and how do I set the Listen-in
channel?
Listen-In Audio is the ability to listen to live
audio on ONE channel at a time, between
channels 1~4. To listen to live audio on a
channel:
1. Open the system MENU, select SYSTEM
SETUP and press the ENTER button.
2. Select SOUND and press the ENTER
button.
3. Under AUDIO, configure the following
options:
• Live Audio - Turns Live System Audio
(from the Audio on the terminal) to ON/
OFF.
• Audio Monitoring Channel - Select
the channel for Listen-in Audio.
• Network Audio TX - Turn network
audio transmission ON/OFF.
• Network Audio RX - Turn network
audio receiving ON/OFF.
NOTE: Once the LIVE AUDIO Feature has
been set to ON, the Remote Control can be
used to select the Listen-In Audio Channel.
Press the AUDIO SEL button on the
Remote Control to switch between
Channels 1~4. An Audio Icon will appear
onscreen next to the current Live Audio
Channel.
Appendix 10: Using Listen-In Audio
63