Table of Contents
Advertisement
Click a cluster name, for example Austin. The Enforcement cluster window appears:
Enforcement Cluster, General
Figure 3-2
The statistics shown in this window are per cluster, where the statistics shown in the Home window
are system-wide. See
Section 1.2, "System Monitor," on page 16
3.3.4 Deleting Enforcement Clusters
NOTE: Enforcement clusters need to be empty before the delete option appears next to the name in
the Novell ZENworks Network Access Control user interface.
To delete Enforcement clusters:
Home window>>System configuration>>Enforcement clusters & servers
1 Click delete next to the cluster you want to remove. The Delete Enforcement
cluster confirmation window appears.
2 Click yes. The System configuration window appears
3.4 Enforcement Servers
The following sections contain more information:
Section 3.4.1, "Adding an ES," on page 44
Section 3.4.2, "Cluster and Server Icons," on page 45
Section 3.4.3, "Editing ESs," on page 45
Section 3.4.4, "Changing the ES Network Settings," on page 46
Section 3.4.5, "Changing the ES Date and Time," on page 47
Section 3.4.6, "Modifying the ES SNMP Settings," on page 47
Section 3.4.7, "Modifying the ES root Account Password," on page 48
Section 3.4.8, "Viewing ES Status," on page 48
for column descriptions.
(Figure 3-3 on page
44).
System Configuration
43
Advertisement
Table of Contents
