Changing The Es Network Settings - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

2 Click the Configuration menu option to access the Enforcement Server's settings. The
Configuration area is displayed:
Figure 3-6
3 Edit the following settings:
ES Network settings —
ES Date and time —
ES SNMP settings —
Other settings —
4 Click ok.

3.4.4 Changing the ES Network Settings

IMPORTANT: Back up your system immediately after changing the MS or ES IP address. If you
do not back up with the new IP address, and later restore your system, it will restore the previous IP
address which can show an ES error condition and cause authentication problems. See
"Maintenance," on page 114
To change the ES network settings:
Home window>>System configuration>>Enforcement clusters & servers>>Select an
ES>>Configuration
46 Novell ZENworks Network Access Control Users Guide
Enforcement Server
Section 3.4.5, "Changing the ES Date and Time," on page 47
Section 3.4.6, "Modifying the ES SNMP Settings," on page 47
Section 3.4.7, "Modifying the ES root Account Password," on page 48
for instructions on backing up and restoring your system.
Section 3.4.4, "Changing the ES Network Settings," on page 46
Section 3.15,