Table of Contents
Advertisement
3.9.2 Selecting Test Update Times
To select test update times:
Home window>>System configuration>>Test updates
1 Using the hour check boxes, select the time periods in which you would like Novell ZENworks
Network Access Control to check for available test updates.
By default, Novell ZENworks Network Access Control checks once every hour using the
Novell Secure Rule Distribution Center. All times listed are dependent upon the clock setting
and time zone of the hardware on which Novell ZENworks Network Access Control is running.
2 Click ok.
3.9.3 Viewing Test Update Logs
To view test update logs:
Home window>>System configuration>>Test updates
1 Click the View test update log link just to the right of the Check for test
updates button. The Test update log window appears:
Figure 3-18
The Test update log window legend is shown in the following figure:
Figure 3-19
3.10 Quarantining, General
The Quarantining menu option allows you to configure the following by cluster:
Select the quarantine method
Select the access mode
Basic 802.1X settings
70
Novell ZENworks Network Access Control Users Guide
Test Update Log
Test Update Log Window Legend
Advertisement
Table of Contents
