Adding 802.1X Devices - Novell ZENWORKS NETWORK ACCESS CONTROL 5.0 - 09-22-2008 User Manual

3.11.3 Adding 802.1X Devices

To add an 802.1X device:
Home window>>System configuration>>Quarantining>>802.1X Quarantine method radio
button>>Add an 802.1X device
Add 802.X Device
Figure 3-23
1 Enter the IP address of the 802.1X device in the IP address text field.
2 Enter a shared secret in the Shared secret text field. The shared secret is used to encrypt
and sign packets between the device and RADIUS server.
NOTE: See your system administrator to obtain the shared secret for your switch.
3 Re-enter the shared secret in the Re-enter shared secret text field.
4 Enter an alias for this device that appears in log files in the Short name text field.
5 Select an 802.1X device from the Device type drop-down list.
6 Enter the configuration settings for the specific device:
Cisco IOS — See
Cisco CatOS — See
Enterasys — See
Extreme ExtremeWare — See
Extreme XOS — See
Foundry — See
HP ProCurve switch — See
HP ProCurve WESM — See
WESM zl," on page
HP ProCurve 420/530 AP — See
ProCurve 530 AP," on page
Section 3.11.5, "Cisco IOS," on page
Section 3.11.6, "Cisco CatOS," on page
Section 3.11.7, "Enterasys," on page
Section 3.11.8, "Extreme ExtremeWare," on page
Section 3.11.9, "Extreme XOS," on page
Section 3.11.10, "Foundry," on page
Section 3.11.11, "HP ProCurve Switch," on page
Section 3.11.12, "HP ProCurve WESM xl or HP ProCurve
97.
Section 3.11.13, "HP ProCurve 420 AP or HP
99.
82.
84.
86.
90.
92.
System Configuration
88.
94.
79