Table of Contents
Advertisement
2 Enter a Read community string, such as Public2.
3 Enter the Allowed source network. This value must be either default or a network
specified in CIDR notation.
3.4.7 Modifying the ES root Account Password
To change the ES root account password:
Home window>>System configuration>>Enforcement clusters & servers>>Select an
ES>>Configuration
1 Enter the new password in the Root password text box in the Other settings area.
2 Re-enter the password in the Re-enter root password text box.
3 Click ok.
3.4.8 Viewing ES Status
There are two ways Novell ZENworks Network Access Control provides ES status:
The icons next to the server name (see
The Status window (see the following steps). The Enforcement server window
allows you to view the following information:
Health status
Upgrade status
Process/thread status
System load average for the server
Current endpoints being tested/minute for the server
Percentage of memory used on the server
Disk space usage for the server
48
Novell ZENworks Network Access Control Users Guide
Figure 3-5 on page
45)
Advertisement
Table of Contents
