Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT Manual page 85

See also /fast4.
44.9 /fast4
Causes the MTA to monitor and process the priority 2 and 3 subdirectories with a separate scanner
thread from the priority 4 through 7 subdirectories. See
MTA Scanner Threads for the Domain and Post Offices," on page
NetWare MTA
Syntax: /fast4
See also /fast0.
44.10 /help
Displays the MTA startup switch Help information. When this switch is used, the MTA does not
start.
NetWare MTA
Syntax: /help or /?
Example: load gwmta.nlm /help
44.11 /home
Specifies the domain directory, where the MTA can access the domain database (wpdomain.db).
There is no default location. You must use this switch in order to start the MTA
NetWare MTA
Syntax: /home-[svr\][vol:]\dir
/home-\\svr\vol\dir
Example: /home-\provo2
/home-mail:\provo2
/home-server2\mail:\provo2
/home-\\server2\mail\provo2
44.12 /httppassword
Specifies the password for the MTA to prompt for before allowing MTA status information to be
displayed in your Web browser. Do not use an existing eDirectory password because the information
passes over the insecure connection between your Web browser and the MTA. See
"Using the MTA Web Console," on page
Section 43.2.3, "Adjusting the Number of
Linux MTA
--fast4
Linux MTA
--help or --?
./gwmta --help
Linux MTA
--home /dir
--home /gwsystem/provo2
657.
678.
Windows MTA
/fast4
Windows MTA
/help or /?
gwmta.exe /help
Windows MTA
/home-[drive:]\dir
/home-\\svr\sharename\dir
/home-\provo2
/home-m:\provo2
home-\\server2\c\mail\provo2
Section 42.2,
Using MTA Startup Switches 687