Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT Manual page 54

MTA Web Console
You can browse and search MTA log files on the
Viewing a Selected MTA Log File
Reviewing log files is an important way to monitor the functioning of the MTA.
1 At the server where the MTA is running, display the MTA server console.
2 Click Log > View Log Files.
3 Select a log file, then click View.
For explanations of messages in the MTA log file, see
GroupWise 7 Troubleshooting 1: Error
MTA Web Console
You can view and search MTA log files on the
Cycling the MTA Log File
You can have the MTA start a new log file as needed.
1 At the server where the MTA is running, display the MTA server console.
2 Click Log > Cycle Log.
Adjusting MTA Log Settings
Default log settings are established when you start the MTA. However, they can be adjusted for the
current MTA session from the MTA server console.
1 At the server where the MTA is running, display the MTA server console.
2 Click Log > Log Settings.
3 Adjust the values as needed for the current MTA session.
See Section 42.3, "Using MTA Log Files," on page
MTA Web Console
You can adjust MTA log settings from the
Editing the MTA Startup File
You can change the configuration of the MTA by editing the MTA startup file from the MTA server
console.
1 At the server where the MTA is running, display the MTA server console.
2 Click Configuration > Edit Startup File.
3 Make the necessary changes, then save and exit the startup file.
656 GroupWise 7 Administration Guide
NetWare Note: Use Options (F10) > View Log Files.
NetWare Note: Use Options (F10) > Cycle Log File.
NetWare Note: Use Options (F10) > Log Settings.
NetWare Note: Use Options > Actions > Edit Startup File.
Log Files page.
"Message Transfer Agent Error
Messages.
Log Files page.
665.
Configuration page. Click the Event Log Settings heading.
Messages" in