File Name - Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT Manual

44.1 @filename
Specifies the location of the MTA startup file. On NetWare
included if the file does not reside in the same directory with the MTA program. On Linux, the
startup file always resides in the /opt/novell/groupwise/agents/share directory. The
startup file must reside on the same server where the MTA is installed.
NetWare MTA
Syntax: @[vol:][\dir\]file
Example: load gwmta @provo2.mta
load gwmta @sys:\agt\provo2.mta
44.2 /activelog
Displays the active log window rather than the alert box when the MTA starts. See
"Monitoring the MTA from the MTA Server Console," on page
NetWare MTA
Syntax: N/A
44.3 /certfile
Specifies the full path to the public certificate file used to provide secure SSL communication
between the MTA and other programs. See
Connections to the MTA," on page
NetWare MTA
Syntax: /certfile-[svr\][vol:]\dir\file
/certfile-\\svr\vol\dir\file
Example: /certfile-\ssl\gw.crt
/certfile-server2\sys:\ssl\gw.crt
/certfile-\\server2\sys\ssl\gw.crt
See also /keyfile and /keypassword.
44.4 /cyhi
Sets the number of seconds in the scan cycle that the MTA uses to scan its priority 0-1 input queues.
The default is 5 seconds. See
Domain, Post Offices, and Gateways," on page
NetWare MTA
Syntax: /cyhi-seconds
Example: /cyhi-3
Linux MTA
@[/dir/]file
./gwmta @../share/
lnxdom.mta
Linux MTA
--activelog
Section 41.2.3, "Securing the Domain with SSL
629.
Linux MTA
--certfile-/dir/file
--certfile /certs/gw.crt /certfile-\ssl\gw.crt
Section 43.2.2, "Adjusting MTA Polling of Input Queues in the
676.
Linux MTA
--cyhi-seconds
--cyhi 3
®
and Windows, the full path must be
Windows MTA
@[drive:][\dir\]file
gwmta.exe @provo2.mta
gwmta.exe @d:\agt\provo2.mta
Section 42.1.1,
645.
Windows MTA
/activelog
Windows MTA
/certfile-[drive:]\dir\file
/certfile-\\svr\sharename\dir\file
/certfile-m:\ssl\gw.crt
/certfile-\\server2\c\ssl\gw.crt
Windows MTA
/cyhi-seconds
/cyhi-3
Using MTA Startup Switches 685