Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT Manual page 18

Corresponding Startup Switches
You can also use the
the message transfer port number.
MTA Web Console
You can view the MTA TCP/IP information on the
heading.
Changing the Link Protocol between Domains to TCP/IP
Make sure you have configured the MTA for TCP/IP at both ends of each link.
To change the link between the domains from mapped or UNC to TCP/IP:
1 In ConsoleOne, click Tools > GroupWise Utilities > Link Configuration.
2 Click View > Domain Links to display domain links.
3 Select the MTA's local domain in the drop-down list.
4 Double-click a domain in the Outbound Links list.
5 Set Link Type to Direct.
6 Set Protocol to TCP/IP.
620 GroupWise 7 Administration Guide
/ip and /tcpport
Outbound and inbound links for the selected domain are listed.
Make sure the information displayed in the IP Address and MT Port fields matches the
information for the MTA for the domain to which you are linking.
switches in the MTA startup file to provide the IP address and
Configuration page under the TCP/IP Settings