Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT Manual page 75

By default, when using mapped or UNC links, the MTA scans its high priority queues every 5
seconds and its regular and low priority queues every 15 seconds. You can adjust the scan cycle
settings to meet the needs of your GroupWise
®
1 In ConsoleOne , browse to and right-click the MTA object, then click Properties.
2 Click GroupWise > Agent Settings to display the Agent Settings page.
3 Decrease the number of seconds in the Scan Cycle field if you want the MTA to scan the
regular and low priority queues (2-7) more often.
or
Increase the number of seconds in Scan Cycle field if you want the MTA to scan the regular and
low priority queues (2-7) less often.
4 Decrease the number of seconds in the Scan High field if you want the MTA to scan the high
priority queues (0-1) more often.
or
Increase the number of seconds in the Scan High field if you want the MTA to scan high
priority queues (0-1) less often.
For the locations and specific uses of the MTA input queues, see
Directories" in GroupWise 7 Troubleshooting 3: Message Flow and Directory
5 Click OK to save the new scan cycle settings.
ConsoleOne then notifies the MTA to restart so the new settings can be put into effect.
Corresponding Startup Switches
You can also use the /cylo
MTA Web Console
You can check the current MTA scan cycle on the
Settings heading.
®
system.
and /cyhi switches in the MTA startup file to adjust the MTA scan cycle.
Configuration
"Message Transfer/Storage
Structure.
page under the Performance
Optimizing the MTA 677