Scheduling Direct Domain Links - Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT Manual

Selecting a Specific Routing Domain for an Individual Domain
As long as you are not forcing all messages to the system default routing domain, you can override
the system default routing information for an individual domain.
1 In ConsoleOne, browse to and right-click the MTA object, then click Properties.
2 Click GroupWise > Routing Options to display the Routing Options page.
System default routing information displays if it has been set up. See
Default Routing Domain" on page
3 Select Override beside the default information you want to change for the selected domain.
4 Set the routing options as needed for the selected domain.
5 Click OK to save the specialized routing information for the selected domain.
ConsoleOne then notifies the MTA to restart so the routing information can be put into effect.
MTA Web Console
You can check routing information on the

41.3.2 Scheduling Direct Domain Links

When domains link across an expensive medium such as long-distance phone lines, you can reduce
the cost of the link by controlling when it is open. You can choose to have some types of messages
wait in the message queues for the lowest phone rate. You can collect messages in the message
queues until a specified time or size limit is reached, then open the link, rather than opening the link
for each message as it arrives in the queue. You can design as many link profiles as you need, to
schedule the transfer of various types of GroupWise messages in the most efficient and cost-
effective manner.
To create a schedule for a link between domains:
1 In ConsoleOne, click Tools > GroupWise Utilities > Link Configuration.
2 In the drop-down list, select the domain to schedule a link for.
632.
Configuration page under the General Settings heading.
"Selecting a System
Configuring the MTA 633