monitor all MTAs in your GroupWise system from one convenient location. In addition, GroupWise
Monitor can notify you when agent problems arise.
GroupWise Monitor Web Console
Figure 42-15
For installation and setup instructions, see
"Installing GroupWise
Monitor" in the
GroupWise 7
Installation
Guide. For usage instructions, see
Part XIII, "Monitor," on page
963.
42.5 Using Novell Remote Manager
If the MTA is running on NetWare 6.5 or on Novell Open Enterprise Server (OES), you can use the
IP Address Management feature in Novell Remote Manager (Manage Server > IP Address
Management) to view the IP address and port configuration for the MTA. This is also true for other
GroupWise agents (POA, Internet Agent, and WebAccess Agent) running on NetWare 6.5/OES
servers.
IMPORTANT: If the MTA is running in protected mode on NetWare, it will not display in Novell
Remote Manager.
You access Novell Remote Manager by entering the following URL in a Web browser:
http://server_address:8008
For example:
http://172.16.5.18:8008
For more information about using Novell Remote Manager, see the
NetWare 6.5 Documentation
Web site (http://www.novell.com/documentation/nw65)
and the
Novell Open Enterprise Server
Documentation Web site
(http://www.novell.com/documentation/oes).
42.6 Using an SNMP Management Console
®
You can monitor the MTA from the Management and Monitoring component of Novell ZENworks
for Servers or another SNMP management and monitoring program. When properly configured, the
MTA sends SNMP traps to network management consoles for display along with other SNMP
monitored programs.
Although the MTA is SNMP-enabled by default, the server where the MTA is installed must be
properly configured to support SNMP, and the MTA object in eDirectory must be properly
configured as well. To set up SNMP services for your server, complete the following tasks:
Section 42.6.1, "Setting Up SNMP Services for the MTA," on page 668
Monitoring the MTA 667
Need help?
Do you have a question about the GROUPWISE 7 - MESSAGE TRANSFERT AGENT and is the answer not in the manual?