Configuring The Mta - Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT Manual

Configuring the MTA

4 1
For detailed instructions about installing and starting the MTA for the first time, see
GroupWise Agents" in the
®
As your GroupWise system grows and evolves, you will probably need to modify MTA
configuration to meet changing system needs. The following topics help you configure the MTA:
Section 41.1, "Performing
Basic MTA Configuration,"
on page 613
Section 41.2, "Configuring
User Access through the
Domain," on page 628
Section 41.3, "Configuring
Specialized Routing," on
page 631
Section 41.4, "Configuring
Domain Maintenance," on
page 638
41.1 Performing Basic MTA Configuration
MTA configuration information is stored as properties of its MTA object in eDirectory
following topics help you modify the MTA object in ConsoleOne
to meet changing system configurations:
Section 41.1.1, "Creating an MTA Object in eDirectory," on page 614
Section 41.1.2, "Configuring the MTA in ConsoleOne," on page 615
Section 41.1.3, "Changing the Link Protocol between Domains," on page 618
Section 41.1.4, "Changing the Link Protocol between a Domain and Its Post Offices," on
page 622
Section 41.1.5, "Binding the MTA to a Specific IP Address," on page 625
Section 41.1.6, "Moving the MTA to a Different Server," on page 626
Section 41.1.7, "Adjusting the MTA for a New Location of a Domain or Post Office," on
page 626
Section 41.1.8, "Adjusting the MTA Logging Level and Other Log Settings," on page 627
GroupWise 7 Installation
Creating an MTA Object in eDirectory
Configuring the MTA in ConsoleOne
Changing the Link Protocol between Domains
Changing the Link Protocol between a Domain and Its Post Offices
Binding the MTA to a Specific IP Address
Moving the MTA to a Different Server
Adjusting the MTA for a New Location of a Domain or Post Office
Adjusting the MTA Logging Level and Other Log Settings
Restricting Message Size between Domains
Enabling Live Remote
Securing the Domain with SSL Connections to the MTA
Using Routing Domains
Scheduling Direct Domain Links
Using a Transfer Pull Configuration
Using eDirectory User Synchronization
Enabling MTA Message Logging
Guide.
®
and change MTA configuration
41
"Installing
. The
TM
Configuring the MTA 613