Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT Manual page 50

MTA Web Console
You also check the MTA software date on the
Displaying the Current MTA Settings
You can list the current configuration settings of the MTA at the MTA server console.
To display the current MTA settings:
1 At the server where the MTA is running, display the MTA server console.
2 Click Configuration > Agent Settings.
For information about the MTA settings, see
page
MTA Web Console
You check the current MTA settings on the
Displaying MTA Status Information
The MTA server console displays essential information about the functioning of the MTA. More
detailed information is also available.
To display detailed MTA configuration information:
1 At the server where the MTA is running, display the MTA server console.
2 Click Configuration > Status to display a list of the locations to which the MTA is connected.
652 GroupWise 7 Administration Guide
NetWare Note: Use View Log File (F9) to check the MTA settings recorded at the top of the log
file.
683.
NetWare Note: Use Options (F10) > Configuration Status.
The following information is provided:
Location Name: Displays the name of the location serviced by the MTA.
Location Type: Indicates whether the location is a domain, post office, or gateway.
Connection Status: Indicates whether the MTA has been successful in locating and opening
the database in the location.
Open: The MTA can access the database or communicate with the agent at the location.
Closed: The MTA cannot access the database or communicate with the agent at the
location. For assistance, see
Agent Problems" in
Suspended: The MTA is not processing messages for the location because it has been
suspended. See Section , "Suspending/Resuming MTA Processing for a Location," on
page 650.
Open Pending: Post offices in the domain are in the process of opening and the MTA is
clearing its holding queues. After this is accomplished, the MTA begins processing current
messages and the status changes to Open.
Home: Displays the full path to the database that the MTA services in the listed location. For a
TCP/IP connection, it displays the IP address of the server that the MTA connects to in order to
service the database.
Environment
Chapter 44, "Using MTA Startup Switches," on
Configuration
"MTA Configuration Status Isn't
GroupWise 7 Troubleshooting 2: Solutions to Common
page.
page.
Open" in "Message Transfer
Problems.