Copying And Compiling The Mta Mib File - Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT Manual

option was not available. Now that you have set up SNMP, you can install GroupWise agent SNMP
support.
At the Windows server where you want to install the GroupWise agent SNMP support:
1 Run setup.exe at the root of the GroupWise 7 Administrator for NetWare/Windows CD,
2 In the Installation Path dialog box, browse to and select the path where the agent software is
3 To shorten the install time, deselect Install GroupWise Agent Software.
4 Continue through the rest of the installation process as prompted by the Agent Installation
5 Continue with

42.6.2 Copying and Compiling the MTA MIB File

An SNMP-enabled MTA returns information contained in a Management Information Base (MIB).
The MIB is an ASCII data structure that defines the information gathered. It also defines the
properties that can be monitored and managed on the SNMP-enabled MTA.
Before you can monitor an SNMP-enabled MTA, you must compile the gwmta.mib file using your
SNMP management program.
NetWare
and
Windows:
Linux:
1 Copy the gwmta.mib file from the \agents\snmp directory to the location required by
2 Compile or import the gwmta.mib file as required by your SNMP management program.
670 GroupWise 7 Administration Guide
then click Install Products > GroupWise Agents > Install GroupWise Agents.
or
Run install.exe from the agents subdirectory on the GroupWise 7 Administrator for
NetWare/Windows CD or in your software distribution directory if you have updated it with the
latest GroupWise software.
installed, then select Install and Configure SNMP for GroupWise Agents.
program.
The Agent Installation program copies the SNMP support files to the agent installation
directory, makes the appropriate Windows registry entries, and restarts the Windows SNMP
service.
Section 42.6.2, "Copying and Compiling the MTA MIB File," on page
The GroupWise MIBs are located on the GroupWise 7 Administrator for NetWare/
Windows CD in the \agents\snmp directory or in the
software_distribution_directory\agents\snmp
updated it with the latest GroupWise software.
The GroupWise MIBs are located on the GroupWise Administrator for Linux CD in the /
agents/snmp directory.
your SNMP management program.
ZENworks Server Management users can access the gwmta.mib file in the software
distribution directory.
For example, to compile the gwmta.mib file for ZENworks Server Management:
2a In ConsoleOne, right-click the Site Server object, then click Properties > MIB Pool.
2b Click Modify Pool > Add.
2c Browse to and select the gwmta.mib file, then click OK.
670.
directory if you have