Using A Transfer Pull Configuration - Novell GROUPWISE 7 - MESSAGE TRANSFERT AGENT Manual

10 For each selected queue, specify the maximum number of minutes a message must wait in each
11 In the Messages field, specify the total number of messages waiting in all selected queues that
12 In the KBytes field, specify the total size in kilobytes of all messages waiting in all selected
13 Click OK to save the link profile and return to the Link Scheduling dialog box.
14 Select the new or modified link profile in the profile list.
15 Click a time slot or drag to select a range of time slots.
16 Select all the time slots you want governed by the selected link profile.
17 Select a different link profile to assign to time slots.
18 When the schedule is saved, click OK to close the Edit Domain Link dialog box.
19 To exit the Link Configuration Tool, click File > Exit > Yes.

41.3.3 Using a Transfer Pull Configuration

Typically for a mapped or UNC link, the MTA for the sending domain writes (or "pushes") message
files into the input queue subdirectories of the receiving domain. However, it is possible to change
this configuration so the MTA for the receiving domain picks up (or "pulls") message files from the
sending domain.
The transfer pull directory is a location in the sending domain where the MTA for the receiving
domain can pick up message files (that is, "pull" them from the sending domain). It represents the
only configuration where an MTA processes messages outside its own domain directory structure.
NOTE: The transfer pull configuration does not apply to the Linux MTA because the Linux MTA
does not use mapped or UNC links.
To set up a transfer pull configuration between domains:
1 Manually create a transfer directory with input queue subdirectories from which outgoing
636 GroupWise 7 Administration Guide
Queue Purpose
7 Low priority status messages
The contents of deselected queues are not monitored but are processed when the link opens.
queue before the link opens.
If you want the link to open immediately when a message arrives in the queue, specify 0 (zero).
will trigger the link to open.
queues that will trigger the link to open.
Time slots assigned to the selected link profile display as green.
or
Create or edit another link profile.
or
Click OK to save the schedule for the current link.
ConsoleOne then notifies the MTA to restart using the new link schedule.
message files are pulled.