Digital Filter; End Of Programming - CARLO GAVAZZI WM23-96 - PROGRAMMING User Manual

16
S
S
S
the instantaneous measurements, set the desired value (from 1 to
16) by means of the
increasing the value both the stability and the settling time of the
measurements are increased. See also "Example 2" in Useful
Information on page 19.
S
To measur-
ing mode
Synchronization
11
Programming
1.2..
..2.1
1.2..
..2.1
and
Use it to exit from programming and
go back to the measuring mode.
Select "End" from the main menu by
means of the
Instrument
firm it with
revision
7

Digital Filter

Select "FiLtEr" by means of the
and keys: to enter the menu
S
press . Select the parameters to
be set with the
enter the menu press
There are two parameters:
- rnG, to set the operating range of
the digital filter. The value is
expressed as % of the full scale
value: set the desired value (from 0 to
100%) by means of the
keys and confirm it with
- Coe, to set the filtering coefficient of
keys and confirm it with

End of programming

S
.
Useful information
17
and keys, to
S
.
S
and keys, con-
and
S
;
. By
18