RPM4-AD™ OPERATION AND MAINTENANCE MANUAL
2.2
SITE REQUIREMENTS
Install RPM4-AD on a flat, stable surface at a convenient height. The front feet can be extended so that
the unit can be inclined for easier viewing. The RPM4-AD can also be mounted in a standard 19 in. rack
using the optional rack mount kit.
2.3
SETUP
2.3.1
PREPARING FOR OPERATION
To prepare RPM4-AD for check out and operation:
Remove the plastic caps from the RPM4-AD rear panel pressure connections.
Remove the protective plastic sheet from the front panel display.
Familiarize yourself briefly with the front and rear panels (see Section 2.3.2).
2.3.2
FRONT AND REAR PANELS
2.3.2.1
© 2005-2007 DH Instruments, a Fluke Company
FRONT PANEL
1. Ready/not ready indicator
2. Display
3. Remote activity indicator
Figure 1. Front panel
Page 6
4. Cursor control keys
5. Multi-function keypad