Table 7. Available Unit Of Measure Types By Active Q-Rpt And Measurement Mode; Table 8. Available Unit Of Measure Types By Active Q-Rpt And Measurement Mode - Fluke RPM4-AD Operation And Maintenance Manual

Reference pressure monitor, air data version
Table of Contents

Advertisement

RPM4-AD™ OPERATION AND MAINTENANCE MANUAL
RPM4 Q-RPT is active and the active measurement mode. See Table 7 or Table 8 for
definition of the types of units of measure are available by Q-RPT and measurement mode.
The choice of six units displayed by the [UNIT] function can be customized by the user (see
Section 3.5.6).

Table 7. Available unit of measure types by active Q-RPT and measurement mode,

-RPT
Hi and
Lo
parallel
<HL>
Hi
<Hi>,
<Hd>

Table 8. Available unit of measure types by active Q-RPT and measurement mode,

Q-RPT
Lo
<Lo>
Hi
<Hi>,
<Hd>
Internally, RPM4-AD always operates in Pascal (Pa), the SI unit of pressure.
expressed in other units of measure are obtained by applying conversion or scaling factors to
Pascal. (see Section 7.2).
OPERATION
To change the active unit of measure for a Q-RPT and
measurement mode, press [UNIT] from the MAIN
RUN screen while the Q-RPT and measurement
mode is active (see Table 9 or Table 10 for default
units of measure by active Q-RPT and measurement
mode). The display is (actual units shown specific to
Q-RPT and measurement mode):
The cursor is on the number corresponding to the active pressure unit of measure for the active range.
To change the pressure unit of measure, select the desired unit. Making the selection
returns to the MAIN RUN screen with the selected unit active.
© 2005-2007 DH Instruments, a Fluke Company
RPM4-AD A160K/A160K (rotary wing)
MEASUREMENT
MODE
Absolute <a>
Gauge,
negative gauge <g>
Absolute <a>
Gauge,
negative gauge <g>,
differential <d>
1. Best measurement uncertainty .
2. Altitude measured by Lo Q-RPT can be displayed while measuring airspeed.
RPM4-AD A350K/A160K (fixed wing)
MEASUREMENT
MODE
Absolute <a>
Gauge,
negative gauge <g>
Absolute <a>
Gauge,
negative gauge <g>,
differential <d>
1. Altitude measured by Lo Q-RPT can be displayed while measuring airspeed.
Page 28
UNIT TYPE
PRESSURE
ALTITUDE
1
1
Yes
Yes
1
2
Yes
No
Yes
No
2
Yes
No
UNIT TYPE
PRESSURE
ALTITUDE
Yes
Yes
Yes
No
Yes
No
1
Yes
No
1kPa 2inHg 3psi
4mbar 5m
AIRSPEED
USER
1
No
Yes
1,2
1
Yes
Yes
No
Yes
2
Yes
Yes
AIRSPEED
USER
No
Yes
No
Yes
No
Yes
1
Yes
Yes
Values
6ft

Advertisement

Table of Contents
loading

Table of Contents