7
.
A
7
.
A
P
P
E
N
P
P
E
N
7.1
REMOTE [ENT]
The RPM4-AD remote ENTER function operates by detecting the open or closed status of the REMOTE
ENTER switch.
The normal status of the ENTER switch is OPEN. When RPM4-AD detects a CLOSED condition held for 300
ms, it is interpreted as equivalent to a press of the [ENT] key.
Any switch may be used to accomplish the remote ENTER function. The switch should be installed on
the optional remote ENTER cable (DHI P/N 103128). Install the switch by connecting its two terminals to
the black and white wires of the remote ENTER cable.
D
I
X
D
I
X
Figure 10. Remote [ENT] connector schematic
1. Black wire
Page 133
2. White wire
© 2005-2007 DH Instruments, a Fluke Company
7. APPENDIX