Setting Up The Energy Metering; Consumed Energy; Setting Up The Power Consumption Control - Daikin Altherma H Hybrid EJHA04AAV3 Installer's Reference Manual

8.5 Setting up the energy metering

8.5.1 Consumed energy

8.6 Setting up the power consumption control

EJHA04AAV3 + EHY2KOMB28+32AA
Daikin Altherma H Hybrid
4P531180-1D – 2025.03
Configuration
The outdoor unit can control DHW pump operation. For more information, see
4
"11 Configuration" [ 136].
▪ Via the user interface, you can read out the following energy data:
- Consumed energy (electricity)
- Consumed gas (only in case of EHY2KOMB28+32AA gas boiler)
▪ You can read out the energy data:
- For space heating
- For domestic hot water production
▪ You can read out the energy data:
- Per two hours (for the last 48 hours)
- Per day (for the last 14 days)
- Per month (for the last 24 months)
- Total since installation
INFORMATION
The calculated consumed energy (electricity) and consumed gas are estimations, the
accuracy cannot be guaranteed.
You can use the following methods to determine the consumed energy:
▪ Calculating
Calculating the consumed energy
▪ The consumed energy is calculated internally based on:
- The actual power input of the outdoor unit
- The set capacity of the bottom plate heater (if applicable)
- The voltage
▪ Setup and configuration: To get accurate energy data, measure the capacity
(resistance measurement) and set the capacity via the user interface for the
bottom plate heater (if applicable).
▪ The power consumption control:
- Allows you to limit the power consumption of the outdoor unit.
- Configuration: Set the power limitation level and how it has to be achieved via
the user interface.
▪ The power limitation level can be expressed as:
- Maximum running current (in A)
- Maximum power input (in kW)
▪ The power limitation level can be activated permanently, but not by digital
inputs.
8 Application guidelines
|
Installer reference guide
61