Related Manuals for HOOKE ROAD BXG.1032-S
Summary of Contents for HOOKE ROAD BXG.1032-S
- Page 1 BXG.1032-S Rack Mounting System (1)Contents: Part Name Size(mm) Picture Gray Ratchet Straps 1800...
- Page 2 (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the electronic version (BXG.1032-S), please scan the QR code. (3) Installation instruction: Step 1: The Gray Ratchet Strap go through the hole A and wheel.
- Page 3 Step 2: According to the picture, pass the Gray Ratchet Strap over the tightener. Step 3: Lift the latch upwards and pull the nylon rope outwards.In order to adjust the rope to the fit length. Step 4: Pull the tightener up and down and the tightener will get tighter and tighter.
- Page 4 Step 5: The installation steps for the other two are consistent with the above steps. Step 6 : The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!
- Page 5 Attention: 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product. 2.Please feel free to contact your distributor if you have any kind of question about your purchase.
Need help?
Do you have a question about the BXG.1032-S and is the answer not in the manual?
Questions and answers