Page 1
BXG.8203 Rear Bumper (1) Contents: Part Size(mm) Part Size(mm) Rear Bumper Assembly Split Lock Washer Hex Bolts M12*30 Hex Nuts Flat Washer M12*30*2 Flange Hex Lock Nuts Button Head Socket Cap Bolts Screws (2) Tools required: a. 18mm Wrench; b. Drive Socket Ratchet Wrench;...
Page 2
About 1 hour, 2-3 people may be needed. Installation time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the electronic version (BXG.8203), please scan the QR code.
Page 3
(4) Installation instruction: Step 1: Assemble the Part “H” &“I”. Step 2: Install the Part“K”into the car with original bolts.
Page 5
Step 3: Install the bumper into the car frame.
Page 6
Step 4: Tighten those bolts after adjusting the bumper totally. Step 5: Install the lamp and the D-rings.
Page 7
Step 6: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product! Attention: 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.