Removing And Refitting The Cover - BESAFE IZI COMFORT User Manual

Removing and refitting the cover

• Make sure that the harness straps are fixed in the right way,
!
after fitting the cover.
Removing the cover
1- Pay attention when you remove the cover, as fitting the
cover is done in the opposite way.
2- To remove the seat cover, the harness straps must be
released at both sides. See red circle (13).
3-
Start to take off the lower seat part and unhook both harness
straps from the metal belt hooks.
4-
The cover of the head rest can be taken off separately by
disconnecting the hooks at the backside and pulling off the
fabric to the front.
10
Refit the cover
1- Pull the head rest in the highest position. Mount the head rest
cover and connect the hooks at the back side. Pull the harness
straps through the holes. Connect the loose bottom part of the
head rest fabric with the plastic part under the head rest.
2- Pull the harness straps through the opening of the seat cover
and lock the harness buckle. Pull the crotch strap through the
opening of the seat part.
3- Pull the loops of the harness straps from the bottom of the
seat part through the openings to the hooks in the bottom of
the seat. Hook both harness straps on the metal belt hooks
and pull the straps firmly to ensure that they are correctly
installed (14).
(13)
4- Mount the top part and then the shoulder parts. Mount the
seat part and bring the seat cover under the rear parts of the
sidewalls.
(14)
11