Installing The I/O Panel - Dell OptiPlex 330 User Manual

1 securing screw
3 I/O cable connector

Installing the I/O Panel

1 Attach the I/O cable to the I/O panel.
1 Place the I/O panel into the slot.
NOTICE:
Take care not to damage the cable connectors and the cable routing clips
when sliding the I/O panel into the computer.
2 Align and slide the I/O panel clamp in the I/O panel clamp slot.
3 Check the front panel to ensure that the USB and audio jacks are centered
on the holes.
4 Replace and tighten the screw that secures the I/O panel.
254
Desktop Computer Parts
1
2 I/O panel
4 I/O connector pull-loop
2
3
4