Setting Up A Home And Office Network; Connecting To A Network Adapter - Dell OptiPlex 330 User Manual

NOTICE:
Do not install your computer in an enclosure that does not allow airflow.
Restricting the airflow impacts your computer's performance, possibly causing it to
overheat.

Setting Up a Home and Office Network

Connecting to a Network Adapter

To connect a network cable:
NOTE:
Plug the network cable into the network adapter connector on the
computer. Do not plug the network cable into the modem connector on the
computer. Do not plug a network cable into a telephone wall jack.
1 Connect the network cable to the network adapter connector on the back
of your computer.
Insert the cable until it clicks into place, and then gently pull it to ensure
that it is secure.
2 Connect the other end of the network cable to a network device.
Setting Up Your Computer
49