Connecting Two Monitors; Connecting Two Monitors With Vga Connectors - Dell OptiPlex 330 User Manual

4 Turn on the printer and then turn on the computer. If the Add New
Hardware Wizard window appears, click Cancel.
5 Install the printer driver if necessary. See the documentation that came
with your printer for instructions.

Connecting Two Monitors

CAUTION:
safety instructions in the Product Information Guide.
If you purchased a graphics card that supports dual monitors, follow these
instructions to connect and enable your monitors. The instructions tell you
how to connect either two monitors (each with a VGA connector), one monitor
with a VGA connector and one monitor with a DVI connector, or a TV.
NOTICE:
If you are connecting two monitors that have VGA connectors, you must
have the optional DVI adapter to connect the cable. If you are connecting two
flat-panel monitors, at least one of them must have a VGA connector. If you are
connecting a TV, you may connect only one monitor (VGA or DVI) in addition to the TV.

Connecting Two Monitors With VGA Connectors

1 Shutdown your system.
NOTE:
If your computer has integrated video, do not connect either monitor to the
integrated video connector. If the integrated video connector is covered by a cap,
do not remove the cap to connect the monitor or the monitor will not function.
2 Connect one of the monitors to the VGA (blue) connector on the back of
the computer.
3 Connect the other monitor to the optional DVI adapter and connect the
DVI adapter to the DVI (white) connector on the back of the computer.
4 Restart your system.
60
Setting Up Your Computer
Before you begin any of the procedures in this section, follow the