Floppy Drive - Dell OptiPlex 330 User Manual

page 257).
NOTICE:
To connect a network cable, first plug the cable into the network port or
device and then plug it into the computer.
12 Connect your computer and devices to electrical outlets, and then turn
them on.
13 Partition and logically format your drive before you proceed to the next
step.
14 Check the system setup for drive configuration changes (see "Entering
System Setup" on page 79).
15 Test the hard drive by running the Dell Diagnostics. (see "Dell
Diagnostics" on page 111).
16 Install your operating system on the hard drive. For instructions, see the
documentation that came with your operating system.

Floppy Drive

CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, laceration by moving fan blades, or
other unexpected injuries, always unplug your computer from the electrical outlet
before removing the cover.
NOTE:
If you are adding a floppy drive, see "Installing a Floppy Drive" on page 235.
Removing a Floppy Drive
1 Follow the procedures in "Before You Begin" on page 143.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 209).
Desktop Computer Parts
233