Dell OptiPlex 330 User Manual page 86

AC Recovery
(Off default)
Auto Power On
(Off default)
Auto Power Time
Low Power Mode
(Off default)
86
System Setup
Determines how the system responds when AC power is
re-applied after a power loss.
• Off commands the system to stay off when the power
is re-applied. You must press the front-panel power
button before the system turns on.
• On commands the system to turn on when the power
is re-applied.
• Last commands the system to return to the last power
state the system was in just before it was turned off.
Sets the computer to automatically turn on.
• Off disables this feature.
• Everyday turns the computer on every day at the time
set in Auto Power Time.
• Weekdays turns the computer on every day from
Monday through Friday at the time set in Auto Power
Time.
NOTE:
This feature does not work if you turn off your
computer using the switch on a power strip or surge
protector.
Sets time to automatically turn on the computer.
Time is kept in the standard 12-hour format
(hours:minutes). Change the startup time by pressing
the right- or left-arrow key to increase or decrease the
numbers, or type numbers in both the date and time
fields.
When Low Power Mode is selected, remote wakeup
events will no longer power up the computer from
Hibernate or Off via the onboard network controller.