11 Check the system setup for the appropriate diskette Drive Option changes
(see "Entering System Setup" on page 79).
Installing a Floppy Drive
1 Follow the procedures in "Before You Begin" on page 143.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 147).
3 Remove the bezel (see "Removing the Bezel" on page 165).
4 If you are replacing a floppy drive, remove the shoulder screws from the
existing drive and attach the screws to the replacement drive.
5 If you are installing a new floppy drive:
Remove the drive-panel insert for your new drive (see "Drive-Panel
a
Inserts" on page 178).
Remove the shoulder screws from the inside of the drive-panel insert.
b
Attach the screws to the new drive.
c
6 Align the shoulder screws on the floppy drive with the shoulder screw slots,
and gently slide the drive into the bay until it clicks into place.
182
Mini Tower Computer Parts