Dell OptiPlex 330 User Manual page 187

10 Configure the drives in system setup (see "Entering System Setup" on
page 79).
Installing an Optical Drive
1 Unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that the
drive is configured for your computer.
2 Follow the procedures in "Before You Begin" on page 143.
3 If you are replacing an optical drive, remove the shoulder screws from the
existing drive and attach the screws to the replacement drive.
4 If you are installing a new optical drive:
Remove the shoulder screws from the inside of the drive-panel insert.
a
Attach the screws to the new drive.
b
5 Align the shoulder screws on the optical drive with the shoulder screw
slots, and slide the drive into the bay until it clicks into place.
Mini Tower Computer Parts
187