Table of Contents
Advertisement
Removing the cable management arm
Pull the release pin and slide the cable management arm out from the inner rail.
1.
Removing the server from the rack
WARNING: The server is very heavy, up to 63.5 kg (140 lb). To reduce the risk of
personal injury or damage to the equipment:
•
Remove all power supplies and hard drives to reduce the weight of the server before
lifting it.
•
Observe local occupational health and safety requirements and guidelines for manual
material handling.
•
Use more than one person to lift and stabilize the server.
Extend the server on the rack rails until the server rail-release latches engage.
1.
Pull the side release latch and extend the server until the server is free from the rack.
2.
Remove the server from the rack.
3.
Place the server on a flat, level surface with the access panel facing down.
4.
Hardware options installation 75
Advertisement
Table of Contents
