Repeat for the right plastic clip.
d.
Connect the power cable from the server to the tape drive.
15.
Connect one end of the data cable to the tape drive and thread the other end into the server through
16.
the tape drive bay.
IMPORTANT: Each SCSI device in the server must have a unique address. The server automatically sets all
SCSI IDs for hot-plug drives, but you must set the SCSI IDs for devices installed in the media cage.
Slide the tape drive into the bay until it is seated securely.
17.
Connect the cables:
18.
NOTE: The appropriate cables should ship in the individual option kits or with the device being installed.
Hardware options installation 58