Dell PowerVault NX3500 Administrator's Manual page 21

Table 1-1. PowerVault NAS System Terms
Power module
(battery unit)
PowerVault
MD3xx0i
PowerVault NAS
Configuration
Utility (NASCU)
PowerVault NAS
Manager
PowerVault NAS
system
Standby controller
SAN network (iSCSI
network)
One of the battery units in a BPS.
Refers to the PowerVault MD3200i, MD3220i, MD3600i,
MD3620i iSCSI storage solutions.
The setup wizard used to initially discover and configure a
PowerVault NAS system. This utility is only used for initial
setup.
The web-based user interface, which is part of the PowerVault
NX3500 software, used to manage the PowerVault NAS
system.
A fully configured, highly-available and scalable NAS
appliance, providing NAS (CIFS and/or NFS) services, which
is comprised of a pair of NAS controllers, a BPS, a PowerVault
storage subsystem and the NAS Manager.
A server appliance that is not installed with the PowerVault
NX3500 DSFS software. For example, a new or replacement
controller from the Dell factory is considered as a standby
controller.
The network that carries the block level (iSCSI) traffic and to
which the storage subsystem is connected.
NOTE:
It is recommended that this network be isolated from the
LAN/client network.
(continued)
Introduction
21