Supported Applications; Enabling Ndmp Support; Changing Ndmp Password - Dell PowerVault NX3500 Administrator's Manual

Supported Applications

The PowerVault NX3500 is certified to work with the following DMAs:
• Symantec BackupExec 2010R3
• Symantec NetBackup 7.0 or later
• CommVault Simpana 9.0 or later

Enabling NDMP Support

To enable NDMP support:
1 From the NAS Manager, click Data ProtectionNDMPNDMP
Configuration.
The NDMP Agent Configuration page is displayed.
2 Select the Enable NDMP check box.
3 Enter the IP address of the DMA server. DNS names are not supported.
4 Click Save Changes.

Changing NDMP Password

User name and password are required when configuring an NDMP server in
the DMA. The username is backup_user and cannot be changed. To change
the password:
To change the NDMP password:
1 Click Data ProtectionNDMPNDMP Configuration.
2 Click Change Backup User Password.
3 Enter admin password and the new password for backup_user.
4 Click Save Changes.
102
Protecting Data on PowerVault NX3500