Adding An Administrator; Changing The Administrator's Password - Dell PowerVault NX3500 Administrator's Manual

Adding an Administrator

When defining an administrator, you specify the administrator permission
level. Permission levels are predefined in the system.
The defined permission levels are as follows:
• Administrator
• View only
The permission level defines the set of actions that are allowed by the user at
this level.
To add an administrator:
1 Click Add in the Actions bar to add an administrator to the list.
2 Click Filters to define filter rules for SNMP traps.
3 Define the minimum trap severity that will be sent for various categories
of traps.
The default option is to send major traps for all categories.
4 Click Save Changes to save the information you have entered.
The new administrator parameters are saved by the system.
5 Click Revert to restore the previous parameters.

Changing the Administrator's Password

To change the administrator's password
1 Click on an administrator listed in the User Name column in the
Administrator list.
The properties of the selected administrator are displayed.
2 Click Change Password in the Action bar.
The Change Password window is displayed.
Managing the PowerVault NX3500
111