Accessing the CLI
To access the CLI from an administrator workstation, use an SSH client, and
connect to the NAS Management VIP address you specified during cluster
setup.
In a Linux prompt, type: ssh admin@<ipaddress>.
A Welcome window is displayed, listing the installed software version and the
available commands in the top level menu.
NOTE:
Tab completion is available: type the first few characters of the command or
menu name and press the Tab key. The name will be completed to the longest
unambiguous sub-string. Press the Tab key again to see the available commands
beginning with the given string.
For example, to access a system that was defined with a NAS Management
VIP of 10.10.1.200:
# ssh admin@10.10.1.200
130
Command Line Interface