Modifying A Subnet; Removing A Subnet; Managing Administrator Users - Dell PowerVault NX3500 Administrator's Manual

Modifying a Subnet

To modify a subnet:
1 Select a specific subnet in the subnets list.
The properties of the selected subnet are displayed.
2 Change the parameters as required.
3 Click Save Changes to save the NAS volume parameters, or click Revert to
restore the previously saved properties.
NOTE:
You cannot rename the Primary subnet, or any internal subnet (Interconnect
and Management). If you need to update the IP addresses of an internal subnet, you
must stop the file system before editing the desired IP addresses. To begin using the
system, start the FileSystem.

Removing a Subnet

To remove a subnet, select the specific subnet from the subnets list and click
Delete in the Action bar. The selected subnet is deleted.
NOTE:
You cannot delete the Primary subnet, or any internal subnet (Interconnect
and Management).

Managing Administrator Users

To manage administrator users:
1 In the NAS Manager, choose System ManagementGeneral
Administrators.
The Administrators page appears, displaying the list of currently defined
administrators.
2 Click on an administrator listed in the User Name column to view the
properties of that specific administrator.
110
Managing the PowerVault NX3500